Traction control

Do you mean they stay illuminated on for the whole of the ride ? 

Traction turns off 

ABS stays on and what is the other lamp illuminated that’s stays on, you mention? 

See if that works 

Also ensure the ABS rings are not damaged or have a stone or large dead insect in it perhaps. I think they need only be a card it card width from the pick up sensor and maybe dirt or something is causing issue. 

Once recalibrated try it. You may need to press and hold + again to reset it/turn it back on. 

Failing that have a word with dealer of give Griff a call. Could just be a duff sensor. Whilst not the cheapest I don’t think they are really stupid cash and you are still in warranty ? 

If the Abs light stays on before either wheel has turned it must be seeing an electrical fault, this could be sensors or pump/control etc.

 But, if the Abs light goes off but then comes on after wheels have turned it is more likely that it is not seeing a wheel moving when others are, this could be mechanical as in a damaged reluctor ring etc.

Traction control will not work if there is an Abs fault.

I'm assuming bike systems will work on a similar basis.

I had this issue on my V4T a while ago. Cant remember how I fixed it. Does your QS still work. Have you got access to Guzzi DiaG?

Yes i know about hold button for 3 seconds 

Didn’t work. I think i know what problem is.

I haven’t calibrated my bike correctly yet. 

As it says it also turns off the aprc on bike. 

So as soon as it stops pouring down I’ll set it. 

Hopefully this will rectify it. I’ll let you know.

Thanks again Jim 

Sorry but Ive got to ask, what has being in Scotland got to do with Guzzi Diag?

Also , do you have full instructions for the Calibration? Many people forget the last step and wonder why it doesn't work!

Sabre wrote: The lights should go out at 3mph. Calibration is for when you change the tyre size, its calibrating the TC.

Just for interest, how different does a tyre need to be before it needs to be calibrated? As we know, the same size in different brands are different diameters as are different tyre types within brands.

Just to say thanks for all your comments. When you don’t know about things like calibration (DONT TOUCH) lol. I think i have finally calibrated it hopefully. I put calibration on it started flashing. Drove approximately 24 mph for a while. Waiting to see calibrated. But kept looking then the calibration was off. So i stopped switched off. Restarted and it seems all good 🤞

Thanks again 

Jim