RSVr Fac 04 - Locking the crank
Printed From: rsvr.net Forums
Category: RSV / RSVR / FACTORY
Forum Name: Technical Chat
Forum Description: Any technical problems or useful advise for other owners, remember this is just advice posted here, if you make something go BANG in a big way don't take anyone to court about it.
URL: http://www.rsvr.net/forum_posts.asp?TID=5179
Printed Date: 27 Mar 2026 at 03:19
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com
Topic: RSVr Fac 04 - Locking the crank
Posted By: tapmyhed
Subject: RSVr Fac 04 - Locking the crank
Date Posted: 24 May 2010 at 17:02
|
How do I lock the crank so I can undo the flywheel bolt? I believe you do something on the clutch side with an M8 bolt?
Can anyone clarify what has to be done to lock the crank in place? I'm forward planning so I can get the sprag replaced as a caution due to milage. I'm dont really want to take the clutch cover off as well!
Cheers me dears!! ------------- Factory 04 Big Bore Whore |
Replies:
Posted By: Frazzell
Date Posted: 25 May 2010 at 10:56
|
Tap there's a very good step by step on an american site for the M8x100 bolt its located on the opposing crank side  next to the oil pressure sensor on the left.you have to insert the bolt then set to TDC via rocking to flywheel side untill the bolt locates through the crank to hold it in place my mate has just done his would have posted some pic's only aint got my upload pic site sorted yet theres a fair bit about it on the tintterweb |
Posted By: tapmyhed
Date Posted: 26 May 2010 at 11:45
|
Spot on, I have the bolt so now I know where to 'put it'....no funny comments please! ------------- Factory 04 Big Bore Whore |