Print Page | Close Window

02 rsv clocks

Printed From: rsvr.net Forums
Category: RSV / RSVR / FACTORY
Forum Name: Technical Chat
Forum Description: Any technical problems or useful advise for other owners, remember this is just advice posted here, if you make something go BANG in a big way don't take anyone to court about it.
URL: http://www.rsvr.net/forum_posts.asp?TID=3950
Printed Date: 27 Mar 2026 at 00:38
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com


Topic: 02 rsv clocks
Posted By: mr.mo
Subject: 02 rsv clocks
Date Posted: 05 Apr 2009 at 13:20
battery died on me a few days back so clocks have all gone to kmh and my rev 'max' light is coming on at about 7-8k revs. how do i reset the clocks to mph and set the max revs warning light? cheers lads



Replies:
Posted By: B o B
Date Posted: 05 Apr 2009 at 14:29
Here you go:-
 
                                 Display settings

 

[A]   [B]   [R]   [C]   [D]

 

Lap switch is the headlight flasher switch

 

Resetting the Service warning


     Press Lap and R together for 5 seconds

Switching KM/H to MPH

    

     Press A about 5 seconds until blinking
     Press B to change unit of measurement
     Press A for 5 seconds to confirm choice


V max Uses trip odometer #1 (Speedo)
    

     To reset trip odometer #1 press R for 2 seconds
     To display V max and distance of trip odometer 1 press B for 2 seconds
     To reset V max press R for 2 seconds


AVS (Average Speed) Uses trip odometer #2
    

     Hold down B for 2 seconds and then press again
     AVS is displayed along with distance of trip odometer #2
     To reset both AVS and trip odometer #2 press R for 2 seconds

Battery voltage, Setting hours, minutes & C or F degrees


      Battery = Press D once.

      Hours = Press D twice then press LAP until hour is set – press D to confirm.

      Minutes = Press D three times then press LAP until minutes are set – D to confirm.

      C or F = Press D four time then LAP to set

Chronometer (Lap Timer)


     V max, AVS, and trip odometer #2 no longer functional in this mode
     Press LAP and within 0.7 seconds press D to enter chronometer mode
     To start timing press LAP and release immediately
     To store a lap time press LAP
     To display lap times press B
     To cycle through the stored laps, press LAP
     To reset memory press A and LAP for 2 seconds
     To leave chronometer function press LAP and D

 

Red Line Threshold

 

     Press C, press C again within 3 seconds.  Keep pressing C until desired value is set.



-------------
Black '04 Tuono, Renegade airbox, Giannelli twin exhaust system, PC3, dyno'd, 16/44 sprockets, lots of CF, Griff'd.
www.apriliaperformance.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.07 - https://www.webwizforums.com
Copyright ©2001-2024 Web Wiz Ltd. - https://www.webwiz.net