Print Page | Close Window

Help needed - 3.0 km added at start of ride

Printed From: rsvr.net Forums
Category: RSV / RSVR / FACTORY
Forum Name: Technical Chat
Forum Description: Any technical problems or useful advise for other owners, remember this is just advice posted here, if you make something go BANG in a big way don't take anyone to court about it.
URL: http://www.rsvr.net/forum_posts.asp?TID=30192
Printed Date: 27 Mar 2026 at 00:38
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com


Topic: Help needed - 3.0 km added at start of ride
Posted By: thunder_cat
Subject: Help needed - 3.0 km added at start of ride
Date Posted: 24 Oct 2024 at 21:55
Whenever I turn the bike on, during the first 100 meters of my rider, the odometer is adding 3km. This happens even if I turn it on, see the 3km added, drive for several KMs (everything is working fine), then turn it off, and turn back on - again, 3 km will be added in the first 100 meters. 
I had the bike checked and they couldn't find any issue. I was told I would have to replace the dashboard



Replies:
Posted By: Spoonz
Date Posted: 24 Oct 2024 at 22:36
It’s been reported by quite a few owners. The bike will add 0.1km per revolution of the wheel for a short period when first moved with the ignition on even if the engine isn’t running ( such as moving on your drive) . To my knowledge no one has a fix and it’s likely a firmware bug in the dash. It’s possible that they have updated the dash and a new one might fix it but none of the reports on the problem I saw have resorted to that due to cost. It might be worth asking the dealer to check your dash firmware is up to date if they haven’t already. 


Posted By: thunder_cat
Date Posted: 25 Oct 2024 at 11:01
Thank you for the answer!
The dealer has checked the firmware (it is up to date) and their only answer was that I need to replace the dashboard, which seemed like a huge expense. 
One thing that I have noticed is that the problem gets worse over time. When it started I noticed 3.0 KM added as I turn the engine on. Now it's already up to 3.8. 
Thanks again for the help. I wish there was some answer, but at least I know that the dealer is not incompetent or making things up



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.07 - https://www.webwizforums.com
Copyright ©2001-2024 Web Wiz Ltd. - https://www.webwiz.net