General Chat - Returning member from a long time ago.

Print Page | Close Window

Returning member from a long time ago.

Printed From: rsvr.net Forums
Category: General Chat
Forum Name: General Chat
Forum Description: Just Chat about life and its myriad of challenges.
URL: http://www.rsvr.net/forum_posts.asp?TID=30133
Printed Date: 27 Mar 2026 at 03:19
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com

Topic: Returning member from a long time ago.

Posted By: Exuptoy2
Subject: Returning member from a long time ago.
Date Posted: 28 May 2024 at 17:40

Hi guys,

Only been here a few times since I sold my 01 yellow RSV-R about 16 years ago.

Old user name was Exuptoy but the email I used to have has long gone so unable to retrieve the password.

I’m not sure if anyone can help, but I’m looking for dimensions of a 1st gen Mille front wheel as I’ve recently bought a 94 Fireblade streetfighter in need of a lot of love. I have 50mm 954 CBR forks and yokes as they’re an easy swap but I fancy a 5 spoke wheel to match the 5 spoke VFR wheel that I got to do a single side swingarm conversion. I’m not bothered about bearings or machining as I have access to that stuff but I would like dimensions of the width of the wheel to the disc mounting faces and width of the discs to see if the calipers are close,

Does anyone here have access to a Gen1 5 spoke that might be able to help please?

Cheers guys.

Replies:

Posted By: Spoonz
Date Posted: 28 May 2024 at 22:18

If it’s for an axial braked gen1 then it’s 110mm between disc mounting faces regardless of wheel design. Radial is +5mm. Discs are 4.5mm wide from memory

Posted By: Exuptoy2
Date Posted: 28 May 2024 at 23:07

Superb mate, I’ll measure what I have once the forks arrive. Cheers @Spoonz