Print Page | Close Window

Gear selector - return spring?

Printed From: rsvr.net Forums
Category: RSV / RSVR / FACTORY
Forum Name: Technical Chat
Forum Description: Any technical problems or useful advise for other owners, remember this is just advice posted here, if you make something go BANG in a big way don't take anyone to court about it.
URL: http://www.rsvr.net/forum_posts.asp?TID=29882
Printed Date: 27 Mar 2026 at 02:04
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com


Topic: Gear selector - return spring?
Posted By: myveetwin
Subject: Gear selector - return spring?
Date Posted: 10 Apr 2023 at 19:01
So, my Gen 1 RSV fell over off the side stand (my stupid fault, stopped facing downhill while I opened a gate). Some minor cosmetic gravel rash, but now the gear selector has developed a mind of its own. The bike runs fine and I can (with some care) find a gear & get drive. I’m assuming I’ve broken or dislodged the shifter return spring?
If so, any advice on what I might be looking at to fixErmm


-------------
Stephen W.



Replies:
Posted By: Spoonz
Date Posted: 10 Apr 2023 at 21:17
Hard to say, Could be spring hopefully, or maybe a bent selector shaft if it feels tight to move. If you drop the clutch side casing you should be able to see any broken spring etc. If it looks intact you will need to remove the shaft and put it on a straight edge to see if it bent. 




Posted By: legend88
Date Posted: 11 Apr 2023 at 08:59
I can't offer any more than Spoonz on the selector but can suggest the US spec sidestand. I'm pretty sure it wouldn't have happened if you had one fitted.

PM me if interested.




Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.07 - https://www.webwizforums.com
Copyright ©2001-2024 Web Wiz Ltd. - https://www.webwiz.net