Print Page | Close Window

Dash Replacement

Printed From: rsvr.net Forums
Category: V4 Tuono
Forum Name: V4 Tuono.
Forum Description: Anything connected to the new Aprilia Tuono models
URL: http://www.rsvr.net/forum_posts.asp?TID=29841
Printed Date: 26 Mar 2026 at 22:46
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com


Topic: Dash Replacement
Posted By: Halvasso boy
Subject: Dash Replacement
Date Posted: 12 Feb 2023 at 17:56
Hello everyone, new member.  
I've been riding for over 30 years and have had several Aprilia. 
Current bikes are Tuono v4r aprs 2011 and r6 5eb.  
My question is, can I just fit second-hand clocks, or will I need the ecu and ignition. 



Replies:
Posted By: Spoonz
Date Posted: 12 Feb 2023 at 18:03
The immobilisor is built into the dash and coded to the keys. If you’re buying a used dash it needs to come with original keys or with the security code for the dash entry so you can program your existing keys to the new dash.  Ecu is not affected


Posted By: Halvasso boy
Date Posted: 12 Feb 2023 at 21:41
How would I be able to find the security code . Is it on the key.  Can I set it through the service section on the dash.


Posted By: Spoonz
Date Posted: 12 Feb 2023 at 22:14
Originally posted by Halvasso boy Halvasso boy wrote:

How would I be able to find the security code . Is it on the key.  Can I set it through the service section on the dash.

There is a default security code set at the factory but the owner is encouraged to set their own to prevent theft. If you don’t have it (assuming it’s not the default code) or a matching key, then the dash is in effect useless.  You can’t read or erase the code even with dealer level software tools. 


Posted By: Halvasso boy
Date Posted: 13 Feb 2023 at 07:07
OK. Thanks . 
My next question, can the printed circuit board be repaired as I damaged mine.


Posted By: Spoonz
Date Posted: 13 Feb 2023 at 10:44
Originally posted by Halvasso boy Halvasso boy wrote:

OK. Thanks . 
My next question, can the printed circuit board be repaired as I damaged mine.

Not aware of any repair companies for Tft’s but it might depend what is broken as to whether a general electronic repair shop could help. 


Posted By: Halvasso boy
Date Posted: 13 Feb 2023 at 13:47
When I was drilling the back to stop the fogging issue , I caught the circuit for the fuel light. Confused


Posted By: Spoonz
Date Posted: 13 Feb 2023 at 17:38
Originally posted by Halvasso boy Halvasso boy wrote:

When I was drilling the back to stop the fogging issue , I caught the circuit for the fuel light. Confused

Provided it hasn’t damaged components you should be able to bridge broken tracking on the board. 


Posted By: Halvasso boy
Date Posted: 13 Feb 2023 at 18:21
Just the tracking broken . 
Will give it a go.Thumbs Up



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.07 - https://www.webwizforums.com
Copyright ©2001-2024 Web Wiz Ltd. - https://www.webwiz.net