Print Page | Close Window

Gen 2 clutch master cylinder

Printed From: rsvr.net Forums
Category: Tuono
Forum Name: General & Technical
Forum Description: Everything and anything to do with the Terrific Tuono... the ultimate Streetfigher!
URL: http://www.rsvr.net/forum_posts.asp?TID=29759
Printed Date: 27 Mar 2026 at 02:26
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com


Topic: Gen 2 clutch master cylinder
Posted By: MikeyR
Subject: Gen 2 clutch master cylinder
Date Posted: 10 Oct 2022 at 20:05
Evening everyone. My Gen 2 T Factory master cylinder seals are shot, nobody I've rung about seal kits seems to reliably know where replacements can be sought. Griff drew a blank too. 

Does anyone know whether it's the same cylinder for Gen 1 & 2, Factory & R if I chance trying to find a second hand unit ?  They all look very similar from internet piccies but if someone knows and can confirm that would be mighty useful. Thanks.



Replies:
Posted By: 426hemi
Date Posted: 10 Oct 2022 at 22:20
Try this company, addiction motorsport, I’ve had numerous parts from them.
https://addictionmotorsport.co.uk/brembo-replacement-parts#s1" rel="nofollow - https://addictionmotorsport.co.uk/brembo-replacement-parts#s1


Posted By: MikeyR
Date Posted: 10 Oct 2022 at 22:38
Great I'll do some research tomorrow, thanks for the link, appreciated. Mike.


Posted By: IanG
Date Posted: 11 Oct 2022 at 13:02
Maybe cross reference to KTM parts? 

I believe they supply Brembo spares that other brands like Aprilia and Ducati won't on the brake side at least Confused

Do PowerHouse supply clutch seals like they do on the brake side?  I've never asked.

When you think about it a seal is just a seal,nothing fancy,it's like bearings,they're mostly just a generic item bought off the shelf so it should be possible to just take the piston and seals to an industrial supplier and see if they would check their inventory.



-------------
www.apworkshops.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk

Looking forward to the next track day


Posted By: MikeyR
Date Posted: 11 Oct 2022 at 15:57
Hi Ian,

I've just dropped Powerhouse an enquiry, they seem to focus solely on brakes but if you don't ask.....
They're another useful supplier I wasn't aware of so thanks for the heads up. 
Underline
Ref the KTM thoughts I've already discussed this with a couple of suppliers as I'd read  similar comments elsewhere, the universal answer so far is 'dunno mate'. 

Griff mentioned historically Aprilia wouldn't commit to some commercial agreement with Brembo hence you can't find a repair kit listed anywhere but I agree with you that there must be commonality with other M/C makes particularly with bikes from the same era.

I like your thoughts on taking the dismantled parts to a more general supplier, time to trawl the local trading estates.


Posted By: IanG
Date Posted: 11 Oct 2022 at 16:21
The trouble with KTM is you have to know which bike uses what proprietary part as they seem to only give you the time of day if you can ask for part X for a model??? KTM if my local shop is typical.

But if you think about things like clutch seals etc chances are they're generic throughout the transport industry and the parts you need may be used on a truck or a car somewhere,the trick is finding someone interested enough to cross reference for you.

Good luck,if you track down some seals be sure to post up.

I seem to recall someone in the past actually commissioned a batch run of uprated seals for I think the MPL/Factory slaves and sold on the excess to make their money back.

It's documented somewhere on AF1  which seals they were.


-------------
www.apworkshops.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk

Looking forward to the next track day


Posted By: gixxerniknik
Date Posted: 13 Oct 2022 at 13:27
Hiya, I've just rebuilt my Gen 1 Clutch master cyl with a kit from wemoto, the new dust seal is a bit pants and I should have tried to save the old onel but the master cyl is now as good as new. Not sure if they do a kit for the gen 2 though. I think it's a different diamter so the gen 1 kit won't fit.

If anyone does find a kit for the gen 2 master cyls, I'd love to know!


Posted By: MikeyR
Date Posted: 05 Dec 2022 at 18:55
I haven't forgotten my original post, just haven't made much progress , life getting in the way of fun & toys at the moment. I'll defo' post a solution if/when I find it.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.07 - https://www.webwizforums.com
Copyright ©2001-2024 Web Wiz Ltd. - https://www.webwiz.net