Print Page | Close Window

Spinning Riv Nut

Printed From: rsvr.net Forums
Category: V4 Tuono
Forum Name: V4 Tuono.
Forum Description: Anything connected to the new Aprilia Tuono models
URL: http://www.rsvr.net/forum_posts.asp?TID=29653
Printed Date: 26 Mar 2026 at 22:56
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com


Topic: Spinning Riv Nut
Posted By: Faddymcfaddywaddy
Subject: Spinning Riv Nut
Date Posted: 02 Jul 2022 at 21:10
Thought I'd share a cool method for fixing the spinning Riv Nut issue on some bikes. I had this issue from new with the tank mount bolt. I believe there is a few Riv nuts used and to fix them it's relatively simple

https://ibb.co/SXFZ8vy" rel="nofollow">

Step 1. Know which thread you are dealing with. In this instance it's an M6.
Step 2. Get a nut of the same size as the bolt
Step 3. Thread the nut onto the bolt as far as it will go
Step 4. Thread the bolt and nut through the Riv Nut as far as it will go
Step 5. Whilst holding the bolt wind the nut down all the way to the flange and then tighten it down. Don't go overboard just half a turn or so.

That should crush the rivnut back up. You can also buy a Rivnut tool and new inserts. I opted for the cheap method 👌



Replies:
Posted By: constant
Date Posted: 03 Jul 2022 at 05:46
little things that make life easier for the future 
cheers



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.07 - https://www.webwizforums.com
Copyright ©2001-2024 Web Wiz Ltd. - https://www.webwiz.net