Print Page | Close Window

AP Rearsets

Printed From: rsvr.net Forums
Category: General Chat
Forum Name: Technical info
Forum Description: Part numbers and sources for all Aprilia models.
URL: http://www.rsvr.net/forum_posts.asp?TID=29169
Printed Date: 26 Mar 2026 at 22:46
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com


Topic: AP Rearsets
Posted By: twinfan
Subject: AP Rearsets
Date Posted: 05 May 2021 at 07:54
Hi All , I have purchased a lovely set of AP rearsets from a very helpful member on here, and i am in the process of fitting them to my 05 plate rsv factory, I am using the left side plate on the right, and vice versa so I can have the pegs lower and back from normal (old age and long legs)
Question is does anyone have a photo of this set up? orientation of the gear box lever pointing up or down? do you have to have a longer adjusting rod between that lever and the pedal? what side the adjuster rod goes inside or outside of the pedal? and lastly (i think) do i need a different rear brake hose or master cylinder, the back brake is as good as useless at the moment.
any help or photos  (or even an installation diagram) would be gratefully received, 
Fingers crossed Paul


-------------
on my licence it says "tear down the dotted line" so I DO!



Replies:
Posted By: wigginsjp
Date Posted: 05 May 2021 at 08:53
Paul 

Sending you a PM 👍🏻


-------------
Aprilia RSVR Factory 2007 V2 1060cc Big Bore
Aprilia RSVR Factory 2004 Race Bike
Kawasaki ZX10R 2007 Race Bike
Aprilia Tuono V4 1100 Factory 2020
www.apriliaperformance.co.uk
www.apworkshops.co.uk


Posted By: twinfan
Date Posted: 05 May 2021 at 16:19
Cheers James 

-------------
on my licence it says "tear down the dotted line" so I DO!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.07 - https://www.webwizforums.com
Copyright ©2001-2024 Web Wiz Ltd. - https://www.webwiz.net