Double whoops
Printed From: rsvr.net Forums
Category: General Chat
Forum Name: Other Bikes
Forum Description: SXV, RS250 or any other bike, Discuss it here.
URL: http://www.rsvr.net/forum_posts.asp?TID=28748
Printed Date: 27 Mar 2026 at 00:21
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com
Topic: Double whoops
Posted By: 426hemi
Subject: Double whoops
Date Posted: 23 Aug 2020 at 16:11
This came up and couldn’t say no.
|
Replies:
Posted By: 426hemi
Date Posted: 23 Aug 2020 at 16:13
It’s the pb project blade, 172bhp, 173kg fuelled, it feels like a pushbike.
|
Posted By: redratbike
Date Posted: 23 Aug 2020 at 17:18
|
I love the paint scheme And yes a definite double whoops there Getting a great collection there -------------  |
Posted By: JimmyV4
Date Posted: 23 Aug 2020 at 17:38
|
nice brike, nice power i recently had my 1199s tuned i have a print out at 191rw and its in full race body, so its ultra light.
|
Posted By: legend88
Date Posted: 23 Aug 2020 at 18:03
|
Hemi, is there no end to your mistakes!  |
Posted By: blacklines
Date Posted: 23 Aug 2020 at 18:10
|
Wish I made mistakes like that £ looks good, what did they do to get to that weight?
------------- Owen |
Posted By: 426hemi
Date Posted: 23 Aug 2020 at 20:04
| It’s got rotobox carbon rims , Kevlar bodywork, lightweight subframes, mountains of ti bolts, lithium battery and numerous other bits, I need to make a bracket for the can as it’s only supported by the springs and wobbles quite a bit and some carbon in the seat unit where the rear lights bolt through as the Kevlar lets it wobble but other than that ride it. |
Posted By: 426hemi
Date Posted: 23 Aug 2020 at 20:08
| Up close the bodywork is track quality but it was purely built as an exercise in lightness to see how an older modded bike compares to a modern superbike, I can’t wait to get this out on a dawn run 😊 |
Posted By: BIG UN
Date Posted: 23 Aug 2020 at 20:48
|
Nice purchase buddy.
By all accounts,its a bit of an animal! https://www.1000rr.co.uk/threads/the-pb-blade.37929/page-2" rel="nofollow - https://www.1000rr.co.uk/threads/the-pb-blade.37929/page-2 ------------- |
Posted By: 426hemi
Date Posted: 23 Aug 2020 at 20:56
|
These would finish it off lovely. https://www.bikehps.com/acatalog/SICOM_DMC_Ceramic_Brake_Discs_for_Honda_Motorcycles.html" rel="nofollow - https://www.bikehps.com/acatalog/SICOM_DMC_Ceramic_Brake_Discs_for_Honda_Motorcycles.html |
Posted By: 426hemi
Date Posted: 27 Aug 2020 at 11:08
| I ordered the sicom brakes yesterday 😊 I always wanted the braketech ccm’s for my rsv as I think they look even tricker but I don’t think they will ever get round to making anymore sadly, can’t wait. Took it out for a short run yesterday afternoon and Christ does it go well but the suspension needs softening off as it’s on track settings. |
Posted By: blacklines
Date Posted: 27 Aug 2020 at 11:55
|
Wow that's a big spend on discs! Do you find them significantly better than stock or are you well into diminishing returns there? Imagine the bite, power, feel and weight will be improved a lot. Guess without ever riding on brakes like it's impossible to know what you're missing. ------------- Owen |
Posted By: 426hemi
Date Posted: 27 Aug 2020 at 12:01
| Never tried any ceramic yet and with the work that’s already been done on this to lighten it anything I do will be in the same vein and they’re trick as. |
Posted By: blacklines
Date Posted: 27 Aug 2020 at 12:18
|
Yeah definitely. Mad that the bike is still road legal too. ------------- Owen |
Posted By: IanG
Date Posted: 27 Aug 2020 at 15:15
Different times I know but that's considerably more than I paid for my then low mileage Mille
------------- www.apworkshops.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk Looking forward to the next track day |
Posted By: badapple
Date Posted: 27 Aug 2020 at 15:35
|
Bloody hell that's a bit loopy eh. Filling that new workshop up nicely
------------- I started out with nothing and I've still got most of it left |
Posted By: Diablo
Date Posted: 28 Aug 2020 at 20:06
Gadzooks!  You never fail to amaze us Warren! That's fantastic and I recognised it as soon as I saw it Go to the toip of the class -what a collection and workshop!  ------------- Question everything. |
Posted By: 426hemi
Date Posted: 28 Aug 2020 at 20:20
| Hey rick how are things dude, the duke fighter still trying to push you off the back 😁it’s a nice piece of kit and bought at the wrong time of year but hey ho, it’s gonna be a learning curve 😃 |
Posted By: Diablo
Date Posted: 28 Aug 2020 at 20:47
|
Alright mate, adjusting to the new world etc. Hope you're well friend. Really pleased with the Duc, it's also a light bike. Duc claimed 167 dry, Marchesini etc. I've changed all black plastic to carbon and a few other things. Looking out for some cf wheels and will prob go Brake Tech discs again, but...... Maybe ceramic? Joakim at Spoonvalley was saying I should have with the Ape after I bought the ss ones for the BST's. Mind you, he also wants to supercharge the Duc!! 
------------- Question everything. |
Posted By: 426hemi
Date Posted: 28 Aug 2020 at 20:57
| I always wanted braketech ccm’s on the rsv as they look better than the sicom but no show from them for the foreseeable future, I was looking at a spoonvalley kit for the rsv but the amount of extra machining and parts you had to source yourself at the time nailed it for me, mine is at wratthal’s at the moment getting rebuilt with as few upgrades 😃 |
Posted By: Diablo
Date Posted: 28 Aug 2020 at 20:59
|
Really plaesed you got the PB bike, I can't think of a better home for it.
------------- Question everything. |
Posted By: redratbike
Date Posted: 28 Aug 2020 at 21:22
Finally having the gen2 heads fitted Warren? ------------- |
426hemi wrote:Posted By: badapple
Date Posted: 28 Aug 2020 at 22:07
Sounds like the Ducati is getting the Diablo treatment good to see your name pop up again mate ------------- I started out with nothing and I've still got most of it left |
Posted By: 426hemi
Date Posted: 28 Aug 2020 at 22:32
No not using gen 2, gen1 with porting etc and super finished gearbox. |
Posted By: Diablo
Date Posted: 29 Aug 2020 at 13:20
Thanks Adam, I'll give you a bell soon mate  ------------- Question everything. |
Posted By: badapple
Date Posted: 29 Aug 2020 at 13:55
------------- I started out with nothing and I've still got most of it left |
Posted By: 426hemi
Date Posted: 16 Dec 2020 at 21:11
These turned up from hps today, they’re seriously light. 
|
Posted By: redratbike
Date Posted: 16 Dec 2020 at 22:08
|
Wow very trick Santa came early for someone ------------- |
Posted By: badapple
Date Posted: 16 Dec 2020 at 22:16
|
Jesus Christ!!!
------------- I started out with nothing and I've still got most of it left |
Posted By: 426hemi
Date Posted: 16 Dec 2020 at 22:20
  The original discs had over 40,000 miles of ware on them. |
Posted By: blacklines
Date Posted: 17 Dec 2020 at 08:49
|
The weight saving will be further from the axle where it matters more too. The carriers would be similar you'd think. ------------- Owen |
Posted By: 426hemi
Date Posted: 29 Jan 2021 at 22:12
Well the new fuel tank turned up today, it’s the titanium sp tank, an empty crisp packet probably weighs more.
|
Posted By: badapple
Date Posted: 30 Jan 2021 at 11:01
|
Wow this things going to be ridiculously light. What's your target mate?
------------- I started out with nothing and I've still got most of it left |
Posted By: 426hemi
Date Posted: 30 Jan 2021 at 15:24
| With the tank, discs and forks it should be about 169 kg fuelled. |
Posted By: redratbike
Date Posted: 30 Jan 2021 at 16:19
|
holy sh*teroo for want of a better expression yes sir that is insane !!!! ------------- |
Posted By: badapple
Date Posted: 30 Jan 2021 at 16:27
|
Mate that's incredibly light reminds me of the special build for the Nuremburg sure that was around 160 wet.
------------- I started out with nothing and I've still got most of it left |
Posted By: Chopster
Date Posted: 30 Jan 2021 at 21:08
| That tank is so light it's stuck to the wall |
Posted By: badapple
Date Posted: 30 Jan 2021 at 23:51
|
------------- I started out with nothing and I've still got most of it left |
Posted By: 426hemi
Date Posted: 15 Apr 2021 at 22:29
Picked these lovelies up today.
|
Posted By: 426hemi
Date Posted: 21 Apr 2021 at 21:33
  Got the titanium sp tank fitted with the sicom ceramic discs and nissin wsb calipers. |
Posted By: redratbike
Date Posted: 21 Apr 2021 at 21:49
|
very nice ------------- |
Posted By: 426hemi
Date Posted: 21 Apr 2021 at 22:16
| Wratthal’s sprinkled some magic over it and it’s now putting out 183bhp with 88lb/ft of torque, pistal pistons with super finished gearbox and ceramic bearings with billet velocity stacks. |
Posted By: redratbike
Date Posted: 21 Apr 2021 at 23:08
how’s the mille rebuild coming on ? ------------- |
Posted By: 426hemi
Date Posted: 21 Apr 2021 at 23:11
| The Mille was finished as last winter hit, had the gearbox super finished with ceramic bearings as well, he modified the sigma and fitted an extra steel and friction with the evo 5, still not sure about the akrapovic though, need to do a back to back with my original system. |
Posted By: 426hemi
Date Posted: 06 Jun 2021 at 17:24
Well I wasn’t able to use the nissin 6 pots on this so they’ve gone on the rsv, the M4’s off of that are now on this and sicom make pads for them and hps stock them, because sicom were messing me around with pads Giles at hps offered to lend me a new set of M4’s with new pads and when I explained I could swap mine off of my rsv and it was pointless him ending up with second hand calipers he really appreciated it and did me a deal in some other parts. This is the sicom’s with M4’s now and I just need to go through the bedding in procedure.
|
Posted By: blacklines
Date Posted: 06 Jun 2021 at 18:40
|
Could be something out of a magazine that picture Warren! Brand new racetechs, brembo M4s, k-tech compression adjuster, quick release dry lines, carbon wheel and carbon mudguard. All framing those trick Sicom discs.
------------- Owen |
Posted By: 426hemi
Date Posted: 06 Jun 2021 at 18:44
| When you put it like that phwooarr you sweet talker.😏 |
Posted By: 426hemi
Date Posted: 06 Jun 2021 at 18:50
| I’m just waiting on the ceracarbon forks now. |
Posted By: 426hemi
Date Posted: 06 Jun 2021 at 20:14
| I always wanted a set of the braketech cmc’s and I still think they look a lot nicer but I can’t see them ever getting anymore made, they were made on the back of the stealth bomber contract and when the us government cancelled anymore b2’s braketech lost the in road to manufacturing. |
Posted By: 426hemi
Date Posted: 09 Jun 2021 at 13:53
|
Ceracarbon have built the one leg with the ktech rds kit. https://i.imgur.com/dNmXBbl.jpg" rel="nofollow - https://i.imgur.com/dNmXBbl.jpg |
Posted By: 426hemi
Date Posted: 10 Jun 2021 at 10:41
They’ve made the rear sprocket now.
|
Posted By: Bladerunner919
Date Posted: 10 Jun 2021 at 12:27
|
Very swanky! |
Posted By: 426hemi
Date Posted: 15 Jul 2021 at 18:06
| https://i.imgur.com/OtAtcUA.jpg" rel="nofollow - https://i.imgur.com/OtAtcUA.jpg |
Posted By: redratbike
Date Posted: 16 Jul 2021 at 09:44
|
more porn ------------- |
Posted By: 426hemi
Date Posted: 21 Nov 2021 at 17:22
 
|
Posted By: 426hemi
Date Posted: 21 Nov 2021 at 17:29
|
Posted By: badapple
Date Posted: 21 Nov 2021 at 18:52
Ridiculously exotic it must be insane! Do you know what the weight is now mate? My 675 is down to 165kg wet and feels like a 250 but only 115-120bhp so the blade is an animal  ------------- I started out with nothing and I've still got most of it left |
Posted By: 426hemi
Date Posted: 21 Nov 2021 at 18:54
| It’s at 169kg wet and 183bhp and 88 lbft, gonna be interesting 😁 |
Posted By: badapple
Date Posted: 21 Nov 2021 at 19:03
|
Jeeeeesus. My bike is quick as fook much faster than the Gen2 factory I had before but this has 65 more horses and just 4kg heavier. Let us know when you test it before it floats away ------------- I started out with nothing and I've still got most of it left |