Technical info - 2003 RSV Mille speed sensor issues

Print Page | Close Window

2003 RSV Mille speed sensor issues

Printed From: rsvr.net Forums
Category: General Chat
Forum Name: Technical info
Forum Description: Part numbers and sources for all Aprilia models.
URL: http://www.rsvr.net/forum_posts.asp?TID=27844
Printed Date: 27 Mar 2026 at 02:26
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com

Topic: 2003 RSV Mille speed sensor issues

Posted By: Bigbaz
Subject: 2003 RSV Mille speed sensor issues
Date Posted: 01 Jun 2019 at 09:18

hi,

There’s probably already been posts on this but I can’t locate them. I have a 2003 RSV MILLE R which I thought had a speed sensor issue as it wasn’t reading on the dash. So I purchased a new sensor (OEM) and fitted it. Also the rear disk bolts are OEM too, so no issues with aftermarket Ti etc.

However the dash only picks up sporadically. I’ve metered the connectors and on

Test 1 - I get >9v which is good;

Test 2 - I get 3v, the manual says it should be >6v which is half the expected

Test 3 - the meter shows 0v for 2 seconds when I hand turn the rear wheel but then returns to 3v when it should be 6v

Manual then states if these voltages aren’t being met then it’s a dash board issue and to replace the dash.

My question is has anyone had this issue?

Is it the dash or something else?

Do you know anyone that can repair the dash?

Is anyone selling a fully working Gen 1 2003 RSV Mille dash?

Any help really appreciated

Cheers