Handlebar Risers
Printed From: rsvr.net Forums
Category: Falco
Forum Name: General & Technical
Forum Description: Everything and anything to do with the Fantastic Falco ... aprilia's best kept secret !
URL: http://www.rsvr.net/forum_posts.asp?TID=21897
Printed Date: 27 Mar 2026 at 00:38
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com
Topic: Handlebar Risers
Posted By: drwizz
Subject: Handlebar Risers
Date Posted: 02 Jun 2016 at 09:45
|
Hi All As per the subject can anyone recommend a possible future upgrade Thanks in advance ------------- If you ride it like you stole it then you probably did ! |
Replies:
Posted By: redratbike
Date Posted: 02 Jun 2016 at 13:52
|
so you want to fit clip on type that are height adjustable or renthal type bars to a yoke with risers? -------------  |
Posted By: drwizz
Date Posted: 02 Jun 2016 at 14:05
sorry after reading your reply i realised my question was rather vague i would like to keep the clip ons ------------- If you ride it like you stole it then you probably did ! |
redratbike wrote:Posted By: redratbike
Date Posted: 02 Jun 2016 at 15:57
|
So you need vario bars or height adjustable clip ons then ------------- |
Posted By: 426hemi
Date Posted: 02 Jun 2016 at 17:13
| Gilles do bar risers with various different heights but they are not cheap and i think mfw and lsl as well. |
Posted By: streetdouble
Date Posted: 06 Jun 2016 at 19:12
| I've got HEL raised clip ons , about 1.5 iinches above stock, |
Posted By: Guests
Date Posted: 06 Jun 2016 at 22:11
| You can get some from USA they do a few up to 3 inch there on ebay look ok to be honest |
Posted By: Guests
Date Posted: 06 Jun 2016 at 22:12
| Wood craft or something like that they are called |
Posted By: 426hemi
Date Posted: 07 Jun 2016 at 07:56
| It's worth a try flipping your clipons so the left is on the right and the right on the left upside down, it can give them a flatter profile, it's what i did with with the ducabike clipons i put on my rsv and it gave it about a 2 inch lift. |