gen 1 rev counter gone backwards.
Printed From: rsvr.net Forums
Category: Tuono
Forum Name: General & Technical
Forum Description: Everything and anything to do with the Terrific Tuono... the ultimate Streetfigher!
URL: http://www.rsvr.net/forum_posts.asp?TID=15965
Printed Date: 27 Mar 2026 at 03:19
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com
Topic: gen 1 rev counter gone backwards.
Posted By: adam
Subject: gen 1 rev counter gone backwards.
Date Posted: 04 Aug 2014 at 23:49
|
I was wondering if a few people with first gen tuono or rsv could take a pic of there clocks with ignition on so I can see where the needle should sit ! I know its suppose to be down near oil light but a picture speaks a thousand words sometimes and I was thinking if a few could put a photo up just incase 1 is not the right place. Am I right in thinking the only way to set the rev counter needle in the right place it to lift earth lead on and off till it in the right place ! Seems a weired way to do it. Any help would be appreciated. ------------- A big learning curve that never ends ! www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
Replies:
Posted By: adam
Date Posted: 05 Aug 2014 at 16:37
Come on guys ! There has been plenty of people on here today but I cant seem to get any support on here ! My ask cant be too much is it or am I the only one with the gen 1.  ------------- A big learning curve that never ends ! www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
Posted By: Slackey
Date Posted: 05 Aug 2014 at 17:04
|
Do you just want ignition on and not running? I will sort a pic in a bit mate ------------- www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
Posted By: adam
Date Posted: 05 Aug 2014 at 18:13
|
Just ignition mate so its sat on zero revs so I can set mine. Thanks I appreciate that mate ! ------------- A big learning curve that never ends ! www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
Posted By: Slackey
Date Posted: 05 Aug 2014 at 20:29
|
Here you go mate, ignition on not running http://s126.photobucket.com/user/Slackeyadams/media/Mobile%20Uploads/image_zps84d16c98.jpg.html" rel="nofollow">  ------------- www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
Posted By: adam
Date Posted: 05 Aug 2014 at 23:13
|
Sorted ! Cheers for that !! Its apain in the ass that the rev counters do that when battery is disconnected. ------------- A big learning curve that never ends ! www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
Posted By: damo46
Date Posted: 18 Aug 2014 at 23:56
The rev counter should always sit in the same place when ignition is on and bike not running whether the battery was disconnected or not, were you not asking where the dial moves to as soon as the ignition is turned on,this is done by holding in the C button on the display. This defaults back to 6000rpm on my tuono when the battery is disconnected,holding in the C button gets it back to where I want again. Maybe I am picking you up wrong. ------------- Road Racing Ireland, Do It Between The Hedges |
adam wrote: