FAQ - Fitting AP rearsets

Print Page | Close Window

Fitting AP rearsets

Printed From: rsvr.net Forums
Category: RSV / RSVR / FACTORY
Forum Name: FAQ
Forum Description: Technical and usage issues frequently asked by posters. Please feel free to add anything you feel relevant to The V-twin model range.
URL: http://www.rsvr.net/forum_posts.asp?TID=10722
Printed Date: 27 Mar 2026 at 00:38
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com

Topic: Fitting AP rearsets

Posted By: canmam
Subject: Fitting AP rearsets
Date Posted: 22 Jun 2013 at 20:42

So finally sorted myself out with some AP rearsets, Can anyone help with the fitting? left side is straightforward but not too sure about moving master and res. Is it a hard job or should i book it in?

-------------
Market Harborough Motorcycle Group Facebook.

Replies:

Posted By: pauloblade
Date Posted: 23 Jun 2013 at 08:40

im gonna be fitting some aswell hopefully next wknd on my gen1 tuono.if they arrive in time. also after any tips people have on moving the master cylinder etc.

Posted By: WARNZ
Date Posted: 23 Jun 2013 at 11:35

There's some pics on here somewhere on how to run the brake line,loop up through we're the shock is in the swingarm n then on to m/c n snip the switch wires off the old sensor re route behind frame to battery area then down to new switch solder wires n shrink em job done butt I would put a little loctite on everything as mine vibrated loose

Posted By: canmam
Date Posted: 23 Jun 2013 at 18:18

loctite lol just took the old ones off and one of bolts snapped leaving 10mm showing will try and get some moles on it or will have to drill it out. Was looking at some pics of the switch and i see you put it on top of the master cylinder, how does that work?

-------------
Market Harborough Motorcycle Group Facebook.