RSV Belly pan conversion for 2020 Tuono

Searching for a thread on a belly pan conversion for the later V4 Tuono and can't seem to find much. The power bronze option just makes me wanna stick pencils in my eyes.

It seems pricey enough if you look at the parts list on fowlers but the 2020 is lacking a little pop of colour in the lower half

Any links to the full list of sh1t you might need, brackets etc?

Shot with the mates R1M earlier in the summer 

I did indeed stump up for the Akra - lovely note

A couple more unsolicited photos 

He did say however its sounds epic on the over run so you never know 

Totted up what I think the Belly pan might cost 

It won't add anything, that the Akra map already has and this has been developed with Aprilia, which is why it is approved by Aprilia. BHP gains are claimed around 4-5BHP in conjunction with Akra can.

As mentioned previously any other map will invalidate your warranty, which for me was the deciding factor when I bought my RSV4.

For mine I’ve ordered the right hand rear set assembly,  to remove the hanger for the oem exhaust and decided to get some bar end mirrors for a try. 

If yours looks good with the belly pan conversion I’d consider that myself 👍🏻

Can get all the bits I need for £480 which is still pricey. 

My main stumbling block is the 2021 tuono looks like it will be similar to the Tuono X so will have a full pan fitted. No frame changes so would bolt straight on. 

Wish someone would make these decisions for me 😅

Question...I notice the Tuono and RSV4 have a different system including collector and headers. Is the pan very close to the collector on the right and did you put heat proof matting on as some earlier bikes have melted the belly pan on oem collectors. Only one to not cause issues is given as the full Akrapovic Evo system 

Thank you