Print Page | Close Window

Air filter

Printed From: rsvr.net Forums
Category: General Chat
Forum Name: General Chat
Forum Description: Just Chat about life and its myriad of challenges.
URL: http://www.rsvr.net/forum_posts.asp?TID=28096
Printed Date: 28 Mar 2024 at 17:22
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: Air filter
Posted By: Hangry
Subject: Air filter
Date Posted: 05 Oct 2019 at 20:14
Anyone using the pure tack setup? Looks good.



Replies:
Posted By: Hangry
Date Posted: 05 Oct 2019 at 20:15
Haha pure teck soz.


Posted By: redratbike
Date Posted: 05 Oct 2019 at 21:29
Puretec?

-------------


www.apriliaperformance.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk


Posted By: Hangry
Date Posted: 05 Oct 2019 at 21:37
Soz its predictive tex lol found a race air filter for g1 and g2 rsv called a pure tec race kit looks nice but wanted to know if anyone has used them.it on aprilia kamna site they got some very nice bits for the apes.


Posted By: mixdrive1
Date Posted: 06 Oct 2019 at 18:21
Is it not very similar to the mwr kits?

-------------
current;2001mille,2003R,2003Eddy,2012Tuono. Previous RS250,2006Factory,2001mille,2001R and 2x2002mille


Posted By: Hangry
Date Posted: 07 Oct 2019 at 11:00
It is mate I think I just like the one for the gen2 don't think mwr make one for gen2 mite be wrong tho.was thinking of also using my evo ring so still got the ram air 


Posted By: wigginsjp
Date Posted: 07 Oct 2019 at 19:13
https://www.ducati-kaemna.com/pure-tec-race-filter-rsv-mille-ab-2004-und-tuono-ab-2006.html?___store=tuning_en%20" rel="nofollow - https://www.ducati-kaemna.com/pure-tec-race-filter-rsv-mille-ab-2004-und-tuono-ab-2006.html?___store=tuning_en

I like the look of it. Some good claims also. In fact some good gains on most of their engine stuff


-------------
Aprilia RSVR Factory 2007 V2 1060cc Big Bore
Aprilia RSVR Factory 2004 Race Bike
Kawasaki ZX10R 2007 Race Bike
Aprilia Tuono V4 1100 Factory 2020
www.apriliaperformance.co.uk
www.apworkshops.co.uk


Posted By: wigginsjp
Date Posted: 07 Oct 2019 at 19:15
Originally posted by Hangry Hangry wrote:

It is mate I think I just like the one for the gen2 don't think mwr make one for gen2 mite be wrong tho.was thinking of also using my evo ring so still got the ram air 

Interesting to see with the rubber ring.

I'm not certain if a hooked or Evo offers more power or where but the seal always sounds preferable 


-------------
Aprilia RSVR Factory 2007 V2 1060cc Big Bore
Aprilia RSVR Factory 2004 Race Bike
Kawasaki ZX10R 2007 Race Bike
Aprilia Tuono V4 1100 Factory 2020
www.apriliaperformance.co.uk
www.apworkshops.co.uk


Posted By: wigginsjp
Date Posted: 07 Oct 2019 at 19:17
Originally posted by Hangry Hangry wrote:

It is mate I think I just like the one for the gen2 don't think mwr make one for gen2 mite be wrong tho.was thinking of also using my evo ring so still got the ram air 

https://www.speedycom.co.uk/shop/product.php?productid=18670" rel="nofollow - https://www.speedycom.co.uk/shop/product.php?productid=18670

There you go a gen2 option 
 




-------------
Aprilia RSVR Factory 2007 V2 1060cc Big Bore
Aprilia RSVR Factory 2004 Race Bike
Kawasaki ZX10R 2007 Race Bike
Aprilia Tuono V4 1100 Factory 2020
www.apriliaperformance.co.uk
www.apworkshops.co.uk


Posted By: Hangry
Date Posted: 07 Oct 2019 at 19:30
[QUOTE=wigginsjp] https://www.ducati-kaemna.com/pure-tec-race-filter-rsv-mille-ab-2004-und-tuono-ab-2006.html?___store=tuning_en%20" rel="nofollow - https://www.ducati-kaemna.com/pure-tec-race-filter-rsv-mille-ab-2004-und-tuono-ab-2006.html?___store=tuning_en

I like the look of it. Some good claims also. In fact some good gains on most of their engine stuff
[/QUOTE
That's the one mate I think that with a rubber seal could be a pretty good setup.also the mwr for the gen2 just replaces the stock filter as this one you get rid of it ]


Posted By: Hangry
Date Posted: 07 Oct 2019 at 19:32
Originally posted by wigginsjp wigginsjp wrote:

Originally posted by Hangry Hangry wrote:

It is mate I think I just like the one for the gen2 don't think mwr make one for gen2 mite be wrong tho.was thinking of also using my evo ring so still got the ram air 

Interesting to see with the rubber ring.

I'm not certain if a hooked or Evo offers more power or where but the seal always sounds preferable 
Nor am I bud so my thinking is making the best of both systems if possible. 


Posted By: badapple
Date Posted: 07 Oct 2019 at 20:42
Lovely looking kit, I'm planning on fitting one to the Daytona the 675 guys rave about them and give the biggest gains especially when coupled with other mods so would be ideal with your set up hangry

-------------
I started out with nothing and I've still got most of it left


Posted By: Hangry
Date Posted: 08 Oct 2019 at 14:37
Yeh it does look nice mate it'll sound awesome on ur 675 just gotta order it before brexsh*t lol Wacko


Posted By: legend88
Date Posted: 08 Oct 2019 at 20:24
Just be a little careful.

I almost bought one of those MWR kits for my Gen 1 as I thought it the perfect combination of EVO with a guaranteed filter seal too. However I found some serious concerns about them but can't quite remember what they were, sucking in the filter foam, fire, I just can't remember. I'm sure there is a thread/post about it on here somewhere but it might be hard to find.


Posted By: badapple
Date Posted: 08 Oct 2019 at 20:34
I remember that legend but I thought it was a different brand, lot's of the 675 race guys use them but I'll do a little digging. 

-------------
I started out with nothing and I've still got most of it left


Posted By: badapple
Date Posted: 08 Oct 2019 at 20:34
Originally posted by Hangry Hangry wrote:

Yeh it does look nice mate it'll sound awesome on ur 675 just gotta order it before brexsh*t lol Wacko

Sounds nuts on the stock set up but always room for improvement Wink


-------------
I started out with nothing and I've still got most of it left


Posted By: Hangry
Date Posted: 08 Oct 2019 at 21:25
Originally posted by badapple badapple wrote:

Originally posted by Hangry Hangry wrote:

Yeh it does look nice mate it'll sound awesome on ur 675 just gotta order it before brexsh*t lol Wacko

Sounds nuts on the stock set up but always room for improvement Wink
hehe Evil Smile


Posted By: Hangry
Date Posted: 08 Oct 2019 at 21:29
Originally posted by legend88 legend88 wrote:

Just be a little careful.

I almost bought one of those MWR kits for my Gen 1 as I thought it the perfect combination of EVO with a guaranteed filter seal too. However I found some serious concerns about them but can't quite remember what they were, sucking in the filter foam, fire, I just can't remember. I'm sure there is a thread/post about it on here somewhere but it might be hard to find.
that's not good mate I mite fire them an email cuz the pure tec one looks like it has a cage under it and one on top to secure it?mite be wrong but I'll ask them it anywayThumbs Up


Posted By: wigginsjp
Date Posted: 09 Oct 2019 at 16:58
I would not let it put you off.

If you don't clean the foam filter or if its cleaned with the wrong product (brake cleaner often gets used) then of course they can start to disintegrate. The fire issues on some manufacturers foam filters were because of similar reasons. Bad maintenance of both the filter with wrong products and/or a motorcycle with back firing throttle bodies.

How many on here use Hooked air boxes without issue? 

MWR filters are made of flame retardant foam as is the oil provided it is cleaned annually regardless of mileage 


-------------
Aprilia RSVR Factory 2007 V2 1060cc Big Bore
Aprilia RSVR Factory 2004 Race Bike
Kawasaki ZX10R 2007 Race Bike
Aprilia Tuono V4 1100 Factory 2020
www.apriliaperformance.co.uk
www.apworkshops.co.uk


Posted By: badapple
Date Posted: 09 Oct 2019 at 21:39
Nice to know James as I said a lot of guys run them on the 675 and I'm currently trying to strike a deal on a set of de cat headers to go with the Akra which effectively makes it a full system and I'll be getting the MWR or similar to go along with it should mske some decent power gains and sound gorgeous. 


Posted By: badapple
Date Posted: 09 Oct 2019 at 21:40
Let us know if you go for it Hangry be keen to see what the ape makes with what you've done to it. 

-------------
I started out with nothing and I've still got most of it left


Posted By: wigginsjp
Date Posted: 10 Oct 2019 at 08:40
Originally posted by badapple badapple wrote:

Nice to know James as I said a lot of guys run them on the 675 and I'm currently trying to strike a deal on a set of de cat headers to go with the Akra which effectively makes it a full system and I'll be getting the MWR or similar to go along with it should mske some decent power gains and sound gorgeous. 

Do love those triumphs. Always feel like I'm too big for one (I'm not) and they pull do well out of bends. Always needed to be lairy on the throttle to get past as you punch out or have a straight to pick the Aprilia up to get past and even then that was mid 120's before it started to rein it back. 




-------------
Aprilia RSVR Factory 2007 V2 1060cc Big Bore
Aprilia RSVR Factory 2004 Race Bike
Kawasaki ZX10R 2007 Race Bike
Aprilia Tuono V4 1100 Factory 2020
www.apriliaperformance.co.uk
www.apworkshops.co.uk


Posted By: badapple
Date Posted: 10 Oct 2019 at 09:39
I'd love to take it on track but I'm spending a fortune tarting it up so she's staying as a road bike to ponce about on and polish LOL. I totally agree on the power delivery it feels every bit as quick if not quicker upto 3 figures which is more than enough for the road !

I'm considering getting another one for the track and selling the ZX6R if the right deal comes up over the winter I'm that impressed with it but might be a little out of reach right now with all the renovations on the house we're currently going through time will tell. 


-------------
I started out with nothing and I've still got most of it left


Posted By: Hangry
Date Posted: 28 Oct 2019 at 18:58
Originally posted by badapple badapple wrote:

Let us know if you go for it Hangry be keen to see what the ape makes with what you've done to it. 
Soz been a while but my mum sadly passed after a fairly short battle.
She was an amazing woman that even loved my rsv as much as me,she even sorted all the ordering with the smalt system and couldn't wait to hear it.
But I will post up all figures when I get them.


Posted By: badapple
Date Posted: 28 Oct 2019 at 21:00
Originally posted by Hangry Hangry wrote:

Originally posted by badapple badapple wrote:

Let us know if you go for it Hangry be keen to see what the ape makes with what you've done to it. 
Soz been a while but my mum sadly passed after a fairly short battle.
She was an amazing woman that even loved my rsv as much as me,she even sorted all the ordering with the smalt system and couldn't wait to hear it.
But I will post up all figures when I get them.

So sorry to hear that mate absolutely no need to apologise. Love the fact that your mum was so into it must of been lovely to spend time together like hat. 


-------------
I started out with nothing and I've still got most of it left


Posted By: Hangry
Date Posted: 28 Oct 2019 at 21:13
Thanks bud ye it was really nice guess iv got to get it all sorted bit by bit she even wanted to come and see it on a dyno lol 


Posted By: badapple
Date Posted: 28 Oct 2019 at 21:19
Awesome, I can tell you now my mum wouldn't even know what one is let alone want to see it. Been a few members recently been through what you are buddy always a here for a natter but it's been a bit quiet of late. 

-------------
I started out with nothing and I've still got most of it left


Posted By: Hangry
Date Posted: 28 Oct 2019 at 21:32
Haha think that's why she wanted to see one it was like oh that's sounds interesting.yes I did post on someone else's thread a while back when it happened can't remember the name.on a different note tho iv just got all the paperwork sorted for a 1977 yam it400 2stroke to get road registerd going to be my winter fun bike.


Posted By: wigginsjp
Date Posted: 01 Nov 2019 at 15:13
Condolences totally feel for you at this time. 

Thoughts with you. Your bike will be even more special 


-------------
Aprilia RSVR Factory 2007 V2 1060cc Big Bore
Aprilia RSVR Factory 2004 Race Bike
Kawasaki ZX10R 2007 Race Bike
Aprilia Tuono V4 1100 Factory 2020
www.apriliaperformance.co.uk
www.apworkshops.co.uk


Posted By: Hangry
Date Posted: 01 Nov 2019 at 16:08
Thanks wiggins 
Ye the bike a proper keeper now that's for sure Thumbs Up



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2019 Web Wiz Ltd. - https://www.webwiz.net