Print Page | Close Window

Immobiliser bypass

Printed From: rsvr.net Forums
Category: RSV / RSVR / FACTORY
Forum Name: 'How To Guides'
Forum Description: A compilation of guides and advice from forum members
URL: http://www.rsvr.net/forum_posts.asp?TID=27093
Printed Date: 28 Mar 2024 at 19:35
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: Immobiliser bypass
Posted By: kpracing12
Subject: Immobiliser bypass
Date Posted: 22 Aug 2018 at 14:03
Any way to bypass the immobiliser on a 2008 RSV1000R Factory. Ive had no spark since March and still have not found the problem. Will it still wind over if the immobiliser is faulty? Its a track only bike



Replies:
Posted By: Spoonz
Date Posted: 22 Aug 2018 at 14:27
 
Depends if the immobilisor is just rejecting the key or it's internals have gone tits up. The former will not allow the bike to turn over and the key light will be on solid. If the board has corroded it can do all sorts of weird things.  Usually the dash key light will do something odd when it's acting up as a clue.
Yes it can be bypassed but not so easy to remove it from the loom completely. How to bypass is not in the public domain generally but if you have proof of ownership that match the details of the bike the dealers in the know like AP will likely do it for you.

Not saying you would but If we just pass the info on via PM etc, unless we know the person personally, then there is no control as to where it goes from there and the knowledge can get abused. (that has happened already). 
 


Posted By: wigginsjp
Date Posted: 22 Aug 2018 at 18:02
The wiring loom passes underneath the air intake. Once the front fairing is off its worth checking the cables there. I've seen some damaged there and the immobiliser wires are in that whole cluster. 

The immobiliser removal is a simple job but as Spoonz mentions you can get it done by a dealer once ownership is proved. My race bike has the immobiliser removed and is keyless 


-------------
Aprilia RSVR Factory 2007 V2 1060cc Big Bore
Aprilia RSVR Factory 2004 Race Bike
Kawasaki ZX10R 2007 Race Bike
Aprilia Tuono V4 1100 Factory 2020
www.apriliaperformance.co.uk
www.apworkshops.co.uk


Posted By: Spoonz
Date Posted: 22 Aug 2018 at 20:20
08/09 bikes also had some ecu failures relating to the coils. The coils would backfeed enough current to knock out the coil drivers in the ecu. If you can borrow an ecu it might be worth a try. If it has, to stop it happening again you need to fit some diodes to act as a one way street between ecu and coils.


Posted By: kpracing12
Date Posted: 26 Aug 2018 at 16:08
It has a new wiring loom, crank angle sensor, relays, coil pack, ecu, checked tip over sensor. Its had Axone hooked up and doesn't tell you anything. Dash says 12 , 47 and  P99 codes. Waiting on a cam angle sensor



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2019 Web Wiz Ltd. - https://www.webwiz.net