Print Page | Close Window

mille r yokes

Printed From: rsvr.net Forums
Category: RSV / RSVR / FACTORY
Forum Name: Technical Chat
Forum Description: Any technical problems or useful advise for other owners, remember this is just advice posted here, if you make something go BANG in a big way don't take anyone to court about it.
URL: http://www.rsvr.net/forum_posts.asp?TID=26942
Printed Date: 17 Jul 2018 at 04:39
Software Version: Web Wiz Forums 12.00 - http://www.webwizforums.com


Topic: mille r yokes
Posted By: constant
Subject: mille r yokes
Date Posted: 11 Jul 2018 at 17:31
evening all do ohlins radials from a gen2 fit in the yokes of the gen1 mille r axials the yokes i have the top clamp is too big and the bottom clamp too small 
cheers for any information



Replies:
Posted By: redratbike
Date Posted: 11 Jul 2018 at 18:01
that’s what I used gen1 rsvr yokes 👍

-------------


www.apriliaperformance.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk


Posted By: constant
Date Posted: 11 Jul 2018 at 19:38
cheers mark the yokes the one i got where meant to be off a gen1 r but if they not fit then they cant be


Posted By: Bill R
Date Posted: 11 Jul 2018 at 23:08
Measure the top yoke.
If its off a Mille R (Ohilins) it should measure 51 mm, the Mille (Showa) is 53 mm.


-------------
Rides, Black 2001 Mille R/RR 1102 Track Bike, 2 Black Suzuki 1998 TL 1000S's
       


Posted By: constant
Date Posted: 12 Jul 2018 at 03:17
cheers bill just measured them they must be for showa 



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.00 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net