Print Page | Close Window

Oops again

Printed From: rsvr.net Forums
Category: General Chat
Forum Name: Other Bikes
Forum Description: SXV, RS250 or any other bike, Discuss it here.
URL: http://www.rsvr.net/forum_posts.asp?TID=26499
Printed Date: 19 Feb 2019 at 05:39
Software Version: Web Wiz Forums 12.00 - http://www.webwizforums.com


Topic: Oops again
Posted By: 426hemi
Subject: Oops again
Date Posted: 10 Mar 2018 at 14:10


1992 gsxr 1100n,last of the oilers, roger uperton 1216, rebuilt bottom end with balanced crank and rods, ported and flowed head with uperton cams, new mikuni flat slides with bells and filters, not run in yet, new Ohlins shock, rebuilt forks, new bearings throughout with new chain, sprockets and tyres, needs a nice exhaust system and a tiny bit of bodywork doing but very happy.



Replies:
Posted By: 426hemi
Date Posted: 10 Mar 2018 at 14:11


Posted By: Paddedcell100
Date Posted: 10 Mar 2018 at 14:19
Ooh I like that ....

One of the bikes i always check out on eBay to see what's about, that looks a peach Hemi... a very nice selection of trick bits. πŸ‘ŒπŸ–’

-------------
Better to have something you don't need than need something you don't have....


Posted By: 426hemi
Date Posted: 10 Mar 2018 at 14:46
The builder was the guy in pb a few months ago with the very trick sp2, uperton reckons it's good for 150 bhp plus at the wheel with original carbs and headers so I can't wait to get a system and flat slides on. Need to look at the brakes as well as I've spoilt myself with the brakes on my other bikes.


Posted By: redratbike
Date Posted: 10 Mar 2018 at 15:11
Ohh lovely

My mate used to run billet 6 calipers on his and it stopped on a sixpence I had hayabusa/tl1000 6 pots

-------------


www.apriliaperformance.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk


Posted By: 426hemi
Date Posted: 10 Mar 2018 at 15:24
Had billet 6's on my exup ru and they were very good, loved all the separate pads.


Posted By: Paddedcell100
Date Posted: 10 Mar 2018 at 15:37
Those flatslides must be worth a few bob on their own, i looked at a set of Keihin's for the zx9r and they were about £1500 .

Where did you find it Hemi, the PB forum ?

-------------
Better to have something you don't need than need something you don't have....


Posted By: 426hemi
Date Posted: 10 Mar 2018 at 15:51
Yep on pb, jay 111 said he wanted to finish his 7/11 endurance but needed to sell his 11 1st so I messaged him for details and got itπŸ˜ƒ, he's got some other nice bits for it as well but I want to put my own touches to it.


Posted By: Paddedcell100
Date Posted: 10 Mar 2018 at 16:08
It will be a proper bit of kit once you've done your bits, I really like them anyway but with 150 at the wheel that be an animal ...
A set of BST's would go nicely on it though

-------------
Better to have something you don't need than need something you don't have....


Posted By: 426hemi
Date Posted: 10 Mar 2018 at 19:26
Looking at dymag up7x's in white unless they can do them in the original blue with pfm kit, rcd rearsets and racefit with a long can😍


Posted By: badapple
Date Posted: 10 Mar 2018 at 20:00
Very tasty i like that a lot. Getting quite a collection together

-------------
I started out with nothing and I've still got most of it left


Posted By: 426hemi
Date Posted: 10 Mar 2018 at 20:15
Yeah seem to be, only bought by chance, the guy mentioned in a post that he was looking to sell it so knowing what he's like through his build threads I messaged him, for it's age it's incredibly tidy and with the mods using man maths I couldn't say no 😏


Posted By: 426hemi
Date Posted: 10 Mar 2018 at 20:23


Posted By: redratbike
Date Posted: 10 Mar 2018 at 20:45
Originally posted by 426hemi 426hemi wrote:

Had billet 6's on my exup ru and they were very good, loved all the separate pads.
I remember being a nightmare to swap out!

-------------


www.apriliaperformance.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk


Posted By: 426hemi
Date Posted: 10 Mar 2018 at 20:50
Never had a problem with mine, used to regularly pull the pads for cleaning, very good brakes and used sbs pads if memory is correct.


Posted By: legend88
Date Posted: 10 Mar 2018 at 21:04
Hemi, you do seem to make a lot of mistakes!  Wink

She looks a treat


Posted By: 426hemi
Date Posted: 10 Mar 2018 at 21:14
I know ,I need to have a strong word with myself again and again and ag###.


Posted By: BIG UN
Date Posted: 10 Mar 2018 at 21:37
wow!
proper hairy chested old school mans bike!
love em.
some stunning bikes AND cars youve got buddy.
i can see the gixer ending up a magazine feature too when youve put your mark on it.
white wheels for the win too buddy,its a gixer after all.
theyll suit it to a tee.
these olders bikes,modernised and improved are more stunning to me than most new bikes.


-------------
02 RSV MILLE R


Posted By: legend88
Date Posted: 11 Mar 2018 at 10:51
Originally posted by BIG UN BIG UN wrote:

wow!
proper hairy chested old school mans bike!
love em.
some stunning bikes AND cars youve got buddy.
i can see the gixer ending up a magazine feature too when youve put your mark on it.
white wheels and a white shell suit for the win too buddy,its a gixer after all.
theyll suit it to a tee.
these olders bikes,modernised and improved are more stunning to me than most new bikes.


I see where you are coming from there BIG UN.  LOLBig smile


Posted By: 426hemi
Date Posted: 11 Mar 2018 at 10:59
Mark at rcd is making me some of his rearsets in silver and racefit can make me a system, just need to get a bandit 12 sump and strainer for extra clearance and robinsons foundry have them in stockπŸ˜€


Posted By: cwp
Date Posted: 11 Mar 2018 at 13:32
Love it...πŸ‘

-------------
born ugly what's your excuse!!


Posted By: 426hemi
Date Posted: 15 Mar 2018 at 14:44
Had mr braking here today aka wal from pfm, he was in the country in stoke on Trent and said he would call in to take a look at the gixxer, you couldn't meet a nicer and more helpful bloke who loves his job. He brought some caliper adapters to try so I can fit radial calipers with 330mm iron discs. Said he's going to send me discs, calipers, lines, brake and clutch mc's with numerous spacers to make it all workπŸ˜ƒ


Posted By: redratbike
Date Posted: 15 Mar 2018 at 15:13
Originally posted by 426hemi 426hemi wrote:

Had mr braking here today aka wal from pfm, he was in the country in stoke on Trent and said he would call in to take a look at the gixxer, you couldn't meet a nicer and more helpful bloke who loves his job. He brought some caliper adapters to try so I can fit radial calipers with 330mm iron discs. Said he's going to send me discs, calipers, lines, brake and clutch mc's with numerous spacers to make it all workπŸ˜ƒ
you lucky boy

-------------


www.apriliaperformance.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk


Posted By: badapple
Date Posted: 16 Mar 2018 at 01:17
Not what you know but who eh hemi.

-------------
I started out with nothing and I've still got most of it left


Posted By: 426hemi
Date Posted: 16 Mar 2018 at 06:30
He definitely believes in customer service and is genuinely interested in what your doing πŸ‘


Posted By: Diablo
Date Posted: 06 Apr 2018 at 17:11
That brings back some memories of hooliganism Thumbs Up Thumbs Up


-------------
Question everything.


Posted By: 426hemi
Date Posted: 05 May 2018 at 22:52
Picked the tank up earlier with the new filler fitted and rearsets.



Posted By: 426hemi
Date Posted: 05 May 2018 at 22:56
And the brakes turned up Thursday.


Posted By: badapple
Date Posted: 06 May 2018 at 00:19
Man you really spoil your bikes mate

-------------
I started out with nothing and I've still got most of it left


Posted By: 426hemi
Date Posted: 06 May 2018 at 10:57
Spoiled it a bit more.


Posted By: Diablo
Date Posted: 06 May 2018 at 17:56
Shocked Shocked Shocked ClapClapClapClap

Nice one Hemi, going to be stunning


-------------
Question everything.


Posted By: 426hemi
Date Posted: 06 May 2018 at 18:04
I hope so but if not it will be account breaking.


Posted By: 426hemi
Date Posted: 19 May 2018 at 14:40
Just got it back from Kais, they fitted some new modified springs with a modded air gap and valving, rechromed and tin coated the stanchions , Aqua blasted the feet and set it up for me. The build beginsπŸ˜ƒ


Posted By: 426hemi
Date Posted: 26 May 2018 at 20:14
Got the dymags in and rearsets fitted but Sod's law pfm have supplied 6 bolt discs and it's 5 bolt so had to use original discs for now.


Posted By: 426hemi
Date Posted: 26 May 2018 at 20:16




Posted By: badapple
Date Posted: 27 May 2018 at 00:50
looking great hemi  Whats the plan for it ?

-------------
I started out with nothing and I've still got most of it left


Posted By: 426hemi
Date Posted: 27 May 2018 at 11:40
Racefit are going to make a ti legend system with a long can for it and I have mikuni flatslides to go on and get it re sprayed in the earlier m scheme.
Bought a later banana arm that is having billet adjusters welded into it but that will be a while yet.


Posted By: badapple
Date Posted: 27 May 2018 at 11:56
sounds like another weapon in the garage . I ment more what are you doing with it  classic trackdays, road bike or both? I think you would show up some more modern machines with this bad boy. 

-------------
I started out with nothing and I've still got most of it left


Posted By: 426hemi
Date Posted: 27 May 2018 at 11:58
Road bike for this one, got a k3 for track duties if needed.


Posted By: Shyted
Date Posted: 23 Jun 2018 at 00:21
Oh how i laughed when i read the " i will have to control my self" bit
Not swerved this way for a while .
Good to see you're keeping the motorcycle industry alive.
Nice lump hemi ,and some nice extras too.
Made some acquisitions my self like.  
Regards Dave.


-------------
I used to be uncertain , but now i'm not sure anymore


Posted By: badapple
Date Posted: 23 Jun 2018 at 00:43
Originally posted by Shyted Shyted wrote:

Oh how i laughed when i read the " i will have to control my self" bit
Not swerved this way for a while .
Good to see you're keeping the motorcycle industry alive.
Nice lump hemi ,and some nice extras too.
Made some acquisitions my self like.  
Regards Dave.

Whoo there Dave what's the story????


-------------
I started out with nothing and I've still got most of it left


Posted By: 426hemi
Date Posted: 04 Jul 2018 at 16:38
Get it back Saturday from racefitπŸ˜ƒ

uploads/3709/IMG_0793.PNG" rel="nofollow - IMG_0793.PNG
Only way I could put the image up.


Posted By: badapple
Date Posted: 04 Jul 2018 at 16:52
That's super cool .....how's it sound?

-------------
I started out with nothing and I've still got most of it left


Posted By: 426hemi
Date Posted: 04 Jul 2018 at 16:57
Don't know I'm fetching it Saturday.the pics off racefit's site.


Posted By: cwp
Date Posted: 05 Jul 2018 at 19:38
Wow buddy that exhaust looks the mutts mate. Bet it sounds awesome. Bike looks great πŸ‘Œ

-------------
born ugly what's your excuse!!


Posted By: 426hemi
Date Posted: 06 Jul 2018 at 00:08
Older bikes always look better with long cans,can't wait to pick it up and get the flat slides fitted and set up and run the motor in. Pfm are sending me new disc centres so I can get the front brakes fitted and then the paintπŸ˜€.


Posted By: 426hemi
Date Posted: 06 Jul 2018 at 00:11
Cheers guys, racefit do some lovely work and are really good to deal with.


Posted By: 426hemi
Date Posted: 07 Jul 2018 at 12:21


Posted By: 426hemi
Date Posted: 07 Jul 2018 at 12:23


Posted By: Prsv
Date Posted: 07 Jul 2018 at 14:51
What's it sound like looks loud and raspy


Posted By: 426hemi
Date Posted: 07 Jul 2018 at 16:39
Don't know yet, drained tank for the filler and need to fetch some fuel.


Posted By: 426hemi
Date Posted: 19 Nov 2018 at 11:43
https://www.instagram.com/p/BqMx7UVgBSj/" rel="nofollow - https://www.instagram.com/p/BqMx7UVgBSj/
Mark at Rcd has modded a later w banana arm with his billet adjusters for the 11😍
https://www.instagram.com/p/BphdqG8h1qm/" rel="nofollow - https://www.instagram.com/p/BphdqG8h1qm/


Posted By: cwp
Date Posted: 19 Nov 2018 at 19:34
OMG that's beautiful exhaust system πŸ‘ nice one 

-------------
born ugly what's your excuse!!


Posted By: BIG UN
Date Posted: 19 Nov 2018 at 19:35
ery nice.
any pics of the colour your going for waz,earlier model you said?



-------------
02 RSV MILLE R


Posted By: 426hemi
Date Posted: 19 Nov 2018 at 20:42
I've a photo but the upload keeps saying it's the wrong file type, being a Luddite I hate tech



Posted By: IanG
Date Posted: 20 Nov 2018 at 01:20
LOL

Perhaps try lying to it? 

Not sure if it's possible in this case but sometimes if you change the file suffix things work better


-------------
www.apriliaperformance.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk

Looking forward to the next track day


Posted By: Diablo
Date Posted: 20 Nov 2018 at 15:55
Originally posted by 426hemi 426hemi wrote:

https://www.instagram.com/p/BqMx7UVgBSj/" rel="nofollow - https://www.instagram.com/p/BqMx7UVgBSj/
Mark at Rcd has modded a later w banana arm with his billet adjusters for the 11😍
https://www.instagram.com/p/BphdqG8h1qm/" rel="nofollow - https://www.instagram.com/p/BphdqG8h1qm/


Very very trick Big smile


-------------
Question everything.


Posted By: 426hemi
Date Posted: 28 Nov 2018 at 22:13
https://www.instagram.com/p/BqusyTqgQ-7/" rel="nofollow - https://www.instagram.com/p/BqusyTqgQ-7/


Posted By: 426hemi
Date Posted: 28 Nov 2018 at 22:18
Can't wait to get this back and start on the bodywork, I've bought a full sert replica endurance body kit from xiassbike.
https://www.xaissbike.com/869-suzuki-750-gsxr-de-1990-endurance-replica-90If" rel="nofollow - https://www.xaissbike.com/869-suzuki-750-gsxr-de-1990-endurance-replica-90If


Posted By: cwp
Date Posted: 29 Nov 2018 at 13:40
Originally posted by 426hemi 426hemi wrote:

Can't wait to get this back and start on the bodywork, I've bought a full sert replica endurance body kit from xiassbike.
https://www.xaissbike.com/869-suzuki-750-gsxr-de-1990-endurance-replica-90If" rel="nofollow - https://www.xaissbike.com/869-suzuki-750-gsxr-de-1990-endurance-replica-90If

That looks lovely bit of kit buddy πŸ‘


-------------
born ugly what's your excuse!!


Posted By: 426hemi
Date Posted: 29 Nov 2018 at 14:55
I can'twait to get it back and setup on the dyno, gotta sort a pair of projector lights out nut I think I have found some from a company called furore.
https://furoreproducts.co.uk/projector-headlights" rel="nofollow - https://furoreproducts.co.uk/projector-headlights
They seem to have a good selection.


Posted By: legend88
Date Posted: 29 Nov 2018 at 15:15
Hemi,
Have a look at these people. I rate them highly, I got a conversion kit for my Audi A4 and it is fantastic.

They do kits for bikes as well including the Gen1 which I have posted before but also sell all the parts separately if they don't do a kit for your machine. They do proper Bi-Xenon projector reflector units with solenoid actuated changeover that stops your beam pattern going everywhere. Mot testers are getting hot on Xenon conversions now because of the boy racers just switching the bulbs out but these are properly developed and my car has been through three Mot's now with no problem.

http://www.retrofitlab.com/" rel="nofollow - http://www.retrofitlab.com/



Posted By: 426hemi
Date Posted: 29 Nov 2018 at 16:10
Cheers i'll take a look


Posted By: 426hemi
Date Posted: 12 Dec 2018 at 20:53
https://www.instagram.com/p/BrSxVLxA_qg/?utm_source=ig_web_button_share_sheet" rel="nofollow - https://www.instagram.com/p/BrSxVLxA_qg/?utm_source=ig_web_button_share_sheet


Posted By: 426hemi
Date Posted: 12 Dec 2018 at 21:00
https://www.instagram.com/p/BqusyTqgQ-7/?utm_source=ig_web_button_share_sheet" rel="nofollow - https://www.instagram.com/p/BqusyTqgQ-7/?utm_source=ig_web_button_share_sheet
Picking it up on Saturday


Posted By: badapple
Date Posted: 13 Dec 2018 at 17:20
Trick as fooookWinkTongue

-------------
I started out with nothing and I've still got most of it left


Posted By: BIG UN
Date Posted: 13 Dec 2018 at 19:01
stunning

-------------
02 RSV MILLE R


Posted By: 426hemi
Date Posted: 13 Dec 2018 at 20:12
Fetch it from Mansfield Saturday and calling into cmc clay cross on the way to racefit to pick my titanium paddock stand up for it


Posted By: redratbike
Date Posted: 14 Dec 2018 at 06:35
going to look pretty truck 

-------------


www.apriliaperformance.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk


Posted By: badapple
Date Posted: 14 Dec 2018 at 08:04
Originally posted by redratbike redratbike wrote:

going to look pretty truck 

That's a bit harsh Mark she's a big old girl but wouldn't call it LOLa truck hehehe 


-------------
I started out with nothing and I've still got most of it left


Posted By: redratbike
Date Posted: 14 Dec 2018 at 11:13
Originally posted by badapple badapple wrote:

Originally posted by redratbike redratbike wrote:

going to look pretty truck 

That's a bit harsh Mark she's a big old girl but wouldn't call it LOLa truck hehehe 
combination of my phone and no glasses  it actually came out alright LOL compared to normal

-------------


www.apriliaperformance.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk


Posted By: BIG UN
Date Posted: 15 Dec 2018 at 15:52
Originally posted by 426hemi 426hemi wrote:

Fetch it from Mansfield Saturday and calling into cmc clay cross on the way to racefit to pick my titanium paddock stand up for it

shame ive just seen this buddy,coudvve met for a quick coffee.


-------------
02 RSV MILLE R


Posted By: 426hemi
Date Posted: 15 Dec 2018 at 17:54
They've got a nice r1m in with a few nice bits on, shame about the £17,000 price tag. Would of been nice to meet you bigun.


Posted By: BIG UN
Date Posted: 15 Dec 2018 at 19:24
maybe later next year when the weathers better buddy and your up this end again mate.
yeah,these new bikes are crazy money arent they pal,
look at what youve got with your ape and the gsx1100,
much nicer and more individual,money much better spent mate.


-------------
02 RSV MILLE R


Posted By: 426hemi
Date Posted: 16 Dec 2018 at 14:33


Posted By: cwp
Date Posted: 16 Dec 2018 at 15:16
Wow πŸ‘

-------------
born ugly what's your excuse!!


Posted By: BIG UN
Date Posted: 16 Dec 2018 at 17:36
very nice,thats not going to be quiet !! lol
just how it should be.
excellent stuff from racefit,had one of their beautys on my 03 r1 and my brother has one on his 2011 blade that sounds incredible!


-------------
02 RSV MILLE R


Posted By: 426hemi
Date Posted: 17 Dec 2018 at 17:17
Had the billet breather and mocal oil tank with braided lines fitted.



Posted By: 426hemi
Date Posted: 17 Dec 2018 at 17:20
Mikuni rs38 flatslides wig bellmouths and filters on as well, need to sort out the battery box and under seat area next.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.00 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net