Print Page | Close Window

Gianelli eprom

Printed From: rsvr.net Forums
Category: General Chat
Forum Name: General Chat
Forum Description: Just Chat about life and its myriad of challenges.
URL: http://www.rsvr.net/forum_posts.asp?TID=26256
Printed Date: 28 Mar 2024 at 18:02
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: Gianelli eprom
Posted By: simonb
Subject: Gianelli eprom
Date Posted: 09 Jan 2018 at 20:50
Just about to fit an open airbox and big airboot to my 03 Mille and will need an eprom to suit,i have the chance of a Gianelli one but that's all i know about it,anyway i can find some info about these?
Searched on Google which had one hit that would suggest it would be ok but not much info about.
Thanks
Simon



Replies:
Posted By: Spoonz
Date Posted: 09 Jan 2018 at 21:06
Get a forza one from ed. A lot of those supplied with cans were no better than the stock eeprom or worse (arrow for example)

The fact there is not much info suggests very few were were sold which is not much of an endorsement .


Posted By: legend88
Date Posted: 09 Jan 2018 at 21:07
I know nothing about then but I have a Forza one (AP sell them) as do many on here and it works very well with the mods you have. Add a modded collector as well to get the real benefit of the mods you have already done. Get all your mods done first as the chip you need will change (For example with and without the modded collector uses a different chip)


Posted By: simonb
Date Posted: 09 Jan 2018 at 21:27
I know about the Forza ones and which i will need for the different mods just trying to get some info on the Gianelli one as a couple of posts found via Google seem to suggest decent results but they are old posts so wondered if anyone on here had first hand experience.


Posted By: Jollygiant
Date Posted: 09 Jan 2018 at 22:15
I had a FR100 and one of my air trays on my Racing and they worked really well.

You only need the FR200 if you are using an open air box and modded collector.

On mY mille I have 54mm throttle bodies, arrow link pipes, one of my air trays, PCIII and an FR200. I'll be getting on a dyno and I'm looking forward to finding out how it goes!!


-------------
Check out my pre-preg carbon fibre
www.jollyscarbon.co.uk
www.facebook.com/jollyscarbon
www.instagram.com/jollyscarbon

Has done The Ring…..Slowly but I did it!!


Posted By: Si McMille
Date Posted: 10 Jan 2018 at 01:14
I have a 01 RSV mill (RP), I just fitted 54mm throttle bodies with billet dual velocity stacks..

I also have the bigger boot with the Evo Air box, custom collector mod, Evo Ti Exhaust, SBK chip, PC3,

I’m going to book onto a Dyno again, I was there a few months back with a stock chip, collector mod, stubby can, Evo box and I came in at 120bhp.. had a couple of dips 6k &9k.. but now with the other mods that mid range hits like a hammer and just constant rush of power up to the red line.

-------------
2001 RP Mille
15/42 gearing
54mm tb’s
54mm Evo stacks - dual velocity
Evo air box with K&N
Unrestricted intake boot
Custom Collector Mod
Evo Ti Exhaust
Aprilia EPROM
PC3
Tuono riser conversion



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2019 Web Wiz Ltd. - https://www.webwiz.net