Print Page | Close Window

57s to fit Gen1s

Printed From: rsvr.net Forums
Category: For Sale, Swaps and Wants
Forum Name: Aprilia parts for sale
Forum Description: Post your parts for sale here. No traders please.
URL: http://www.rsvr.net/forum_posts.asp?TID=26041
Printed Date: 28 Mar 2024 at 11:15
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: 57s to fit Gen1s
Posted By: SpannerMonkey
Subject: 57s to fit Gen1s
Date Posted: 26 Oct 2017 at 20:30
I have two sets of modified 57mm throttle bodies to fit Gen1 RSVR/RSV/Tuono & Falco.
These are direct fit with only the need for the idle adjustment screw and air pressure sensor required from your existing TB's.
One set comes with the recommended taller Tuono stacks and one set DOES NOT. Both have been deep cleaned and serviced, blanked in all the correct places (pipes removed and blanked with OEM bolts) and also include injector adaptor leads so are direct fit to your existing loom.
I can assist with fitting instructions and settings. I will pre set the air bypass screws for you. If local to Lincoln I can assist with fitting, however they will require the TPS setting which can be done very easy and I would recommend a proper ballencing AP can do this. I can give you base setting to dial in to get in close.

WITH STACKS £200 DELIVERED TO UK UNDER FULLY INSURED POSTAGE
WITHOUT £160 DELIVERED TO UK UNDER FULLY INSURED POSTAGE.

*any European buyer please message me for additional postage costs*

-------------
2000 RSV Mille (track)
2008 Tuono R (factory spec)



Replies:
Posted By: Matt blueflame
Date Posted: 26 Oct 2017 at 21:14
I bought a set of super clean ready to roll 57's off this guy. He also gave me full technical assistance when setting them up. Only cost me a cuppa.


Just need to get the balancing checked against a exhaust gas analyser. But I'll be honest they are really well cleaned and already have the plugs in the harness for direct fitment.

Don't be cheap and buy crap, buy them done properly.


Posted By: SpannerMonkey
Date Posted: 31 Oct 2017 at 19:47
Bump

-------------
2000 RSV Mille (track)
2008 Tuono R (factory spec)


Posted By: SpannerMonkey
Date Posted: 01 Nov 2017 at 20:14
Both sets now have Stacks 🤘. I can sell with or without, treat your ape fro xmas

-------------
2000 RSV Mille (track)
2008 Tuono R (factory spec)


Posted By: SpannerMonkey
Date Posted: 20 Nov 2017 at 10:51
One set gone to New Zealand. Last set remaing. Full tech help availble on fitting and set up 🖒

-------------
2000 RSV Mille (track)
2008 Tuono R (factory spec)


Posted By: Jollygiant
Date Posted: 20 Nov 2017 at 14:24
I do both air trays and velocity stacks to to fit these now..

-------------
Check out my pre-preg carbon fibre
www.jollyscarbon.co.uk
www.facebook.com/jollyscarbon
www.instagram.com/jollyscarbon

Has done The Ring…..Slowly but I did it!!


Posted By: SpannerMonkey
Date Posted: 21 Nov 2017 at 12:37
Perfectly matcyed with one of Jolly's airbox kits. Just sent a set to New Zealand and denmark

-------------
2000 RSV Mille (track)
2008 Tuono R (factory spec)



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2019 Web Wiz Ltd. - https://www.webwiz.net