![]() |
![]() |
Frankenfalco project started at last |
Post Reply ![]() |
Author | ||
redratbike ![]() Moderator Group ![]() ![]() The Collector Messiah Joined: 07 May 2008 Status: Offline Points: 15032 |
![]() ![]() ![]() ![]() ![]() Posted: 16 Jan 2018 at 09:24 |
|
So the Mille is no more ...well it’s a pile of parts I could probably build it as a standard Mille with the bits I have but that’s for another day in the future m
So in the meanwhile I have moved onto falco’s got a nice one ready to go with highbars and a few other mods done by the previous owner (thanks Rob) Frankenfalco aka project scrambler is go!!!!! ........it’s been a pile of parts and a dead falco (thanks Nooj) for a long time so thought i’d better make a start or it will never happen. ![]() Inspiration was at first the victory pikes peak racer project 156... I may revisit this idea with another falco frame or this may in time go that way ![]() after seeing the triumph below my plans morphed a little ![]() into this so while up the garage I managed to pull a few parts off and fitted the knobbles and bars to start getting some idea at how this will really look ![]() fat 180 knobbly ![]() ![]() next week i'll start seriously thinking about which engine I'm going to use as the one in it is dead , guy checked the valves and thought he dropped something in the engine, left the valve cover off and its had rain etc in it all the cams are rusty so this scrap engine will yield a front cam sensor and stator etc for ......................................................... a gen 2 engine... picked one up before Christmas for £200! its either that or a mille engine that would be easier to fit as a straight bolt in engine...the gen 2 needs the front head modded for a gen1 cam sensor and the stator / flywheel swapping out for a gen1 item off the scrap engine . fingers crossed this weekend will see the forks swapped out with some gold showas Griff rebuilt a while back and only have about 1k on them and the engine pulled out.... then start slicing up a falco seat unit to see if I can get anything like my mock-up pic, it will be slimmer than the falco unit failing that I may go with a panigale seat unit to be a bit different think it would suit it and close to my mock-up pic? ![]() |
||
![]() www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
||
![]() |
||
colinmeadows ![]() Premium Member ![]() ![]() Joined: 22 Jan 2016 Location: cardiff Status: Offline Points: 509 |
![]() ![]() ![]() ![]() ![]() |
|
subscribed !!!!!!!!!!!!!!
|
||
living life in the fairly fast lane rsv mille 2000 & rsv factory 2004, no more until i get a bigger garage ............
|
||
![]() |
||
redratbike ![]() Moderator Group ![]() ![]() The Collector Messiah Joined: 07 May 2008 Status: Offline Points: 15032 |
![]() ![]() ![]() ![]() ![]() |
|
|
||
![]() www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
||
![]() |
||
Diablo ![]() Premium Member ![]() ![]() Joined: 29 Sep 2010 Location: Narrowboat, Ely Status: Offline Points: 2662 |
![]() ![]() ![]() ![]() ![]() |
|
Really looking forward to seeing this and following it's progress Mark!
Go for it buddy. Than Pani seat does look pretty much the same as the mock up you did. Is that a small number board on the front I spy? |
||
Question everything.
|
||
![]() |
||
badapple ![]() Premium Member ![]() ![]() Joined: 03 Nov 2014 Location: Norwich United Kingdom Status: Offline Points: 3639 |
![]() ![]() ![]() ![]() ![]() |
|
Ohhh looking forward to seeing how this develops a build from the parts messiah himself. I like where you are going with this Mark as long as you dont start growing a beard and drinking craft beverages
![]() |
||
I started out with nothing and I've still got most of it left
|
||
![]() |
||
redratbike ![]() Moderator Group ![]() ![]() The Collector Messiah Joined: 07 May 2008 Status: Offline Points: 15032 |
![]() ![]() ![]() ![]() ![]() |
|
I looking forward to it as well ...been a long time coming had the falco a couple of years now mmmnnnn beard well it would all be grey no doubt so that’s a no Got some craft beers for Xmas and poured some down the sink as they are cooking horrible so that’s a no As for the bike it’s the seat unit that is bugging me once I get the shape I want I will get a subframe welded up to suit |
||
![]() www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
||
![]() |
||
redratbike ![]() Moderator Group ![]() ![]() The Collector Messiah Joined: 07 May 2008 Status: Offline Points: 15032 |
![]() ![]() ![]() ![]() ![]() |
|
...yes number board I bought it of off a guy that makes the bits for cb500 race bikes just to try it it’s too small unfortunately but i’ll Sort something out .. |
||
![]() www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
||
![]() |
||
426hemi ![]() Premium Member ![]() owner of the big bore! Joined: 30 Mar 2012 Location: cannock Status: Offline Points: 4107 |
![]() ![]() ![]() ![]() ![]() |
|
You could sweet talk jolly into making you one of his rs seat units for you.
|
||
![]() |
||
Jollygiant ![]() Premium Member ![]() ![]() Carbon Whore Joined: 06 Aug 2012 Location: Naughty Step Status: Offline Points: 1253 |
![]() ![]() ![]() ![]() ![]() |
|
It's not a RS seat unit, it's a HRC based part and I don't own the mould. As with 99.9% of the parts on my bike it's a one off, it's nice to know that you have made the only one in the whole world and not just slung a load of cash at something. |
||
Check out my pre-preg carbon fibre
www.jollyscarbon.co.uk www.facebook.com/jollyscarbon www.instagram.com/jollyscarbon Has done The Ring…..Slowly but I did it!! |
||
![]() |
||
426hemi ![]() Premium Member ![]() owner of the big bore! Joined: 30 Mar 2012 Location: cannock Status: Offline Points: 4107 |
![]() ![]() ![]() ![]() ![]() |
|
I thought it was a Honda rs250 unit, looks good though👍
|
||
![]() |
||
redratbike ![]() Moderator Group ![]() ![]() The Collector Messiah Joined: 07 May 2008 Status: Offline Points: 15032 |
![]() ![]() ![]() ![]() ![]() |
|
|
||
![]() www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
||
![]() |
||
Diablo ![]() Premium Member ![]() ![]() Joined: 29 Sep 2010 Location: Narrowboat, Ely Status: Offline Points: 2662 |
![]() ![]() ![]() ![]() ![]() |
|
Are going to use a 2nd hand seat Mark or a fiberglass replica?
|
||
Question everything.
|
||
![]() |
||
Diablo ![]() Premium Member ![]() ![]() Joined: 29 Sep 2010 Location: Narrowboat, Ely Status: Offline Points: 2662 |
![]() ![]() ![]() ![]() ![]() |
|
The genuine seat looks like it's 4 or 5 pieces with the seat, plus the subframe. There's replica ones that are basically 1 piece, but I'm sure you don't want a horrible bit of foam to sit on...
|
||
Question everything.
|
||
![]() |
||
Tifa ![]() Moto GP Alien ![]() ![]() I am Sparticus, only uglier Joined: 21 Apr 2009 Status: Offline Points: 1814 |
![]() ![]() ![]() ![]() ![]() |
|
This tread lacks angle grinder sparks.
We need angle grinder sparks please. |
||
![]() |
||
redratbike ![]() Moderator Group ![]() ![]() The Collector Messiah Joined: 07 May 2008 Status: Offline Points: 15032 |
![]() ![]() ![]() ![]() ![]() |
|
|
||
![]() www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
||
![]() |
||
redratbike ![]() Moderator Group ![]() ![]() The Collector Messiah Joined: 07 May 2008 Status: Offline Points: 15032 |
![]() ![]() ![]() ![]() ![]() |
|
![]() ![]() ![]() ![]() |
||
![]() www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
||
![]() |
||
Diablo ![]() Premium Member ![]() ![]() Joined: 29 Sep 2010 Location: Narrowboat, Ely Status: Offline Points: 2662 |
![]() ![]() ![]() ![]() ![]() |
|
Ah good, I see now. Yes that would work much better.
I was looking at stuff like this http://www.ebay.co.uk/itm/DUCATI-PANIGALE-889-1199-SBK-RACE-RACING-TRACK-DAY-TAIL-STOCK-SEAT-FAIRING/162831689734?hash=item25e9866806:g:AYgAAOSwi0RXzrPU Which would give the old harris a hard time. What about the actual seat seat? |
||
Question everything.
|
||
![]() |
||
redratbike ![]() Moderator Group ![]() ![]() The Collector Messiah Joined: 07 May 2008 Status: Offline Points: 15032 |
![]() ![]() ![]() ![]() ![]() |
|
![]() . if you see a cheapy even damaged grab it for me !!!
|
||
![]() www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
||
![]() |
||
Diablo ![]() Premium Member ![]() ![]() Joined: 29 Sep 2010 Location: Narrowboat, Ely Status: Offline Points: 2662 |
![]() ![]() ![]() ![]() ![]() |
|
If it were me, I'd do the same. What about the subframe? Modified Ducati or build one from scratch?
The more I look at that seat, the more I like it. Remember when we were all putting 916 seats on our Gixer's? ![]() |
||
Question everything.
|
||
![]() |
||
redratbike ![]() Moderator Group ![]() ![]() The Collector Messiah Joined: 07 May 2008 Status: Offline Points: 15032 |
![]() ![]() ![]() ![]() ![]() |
|
![]() |
||
![]() www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
||
![]() |
||
Diablo ![]() Premium Member ![]() ![]() Joined: 29 Sep 2010 Location: Narrowboat, Ely Status: Offline Points: 2662 |
![]() ![]() ![]() ![]() ![]() |
|
I really miss those days!
Sweary Bob Spondon! Remember Steve Burns and his Spondon Monster turbo's! |
||
Question everything.
|
||
![]() |
||
Diablo ![]() Premium Member ![]() ![]() Joined: 29 Sep 2010 Location: Narrowboat, Ely Status: Offline Points: 2662 |
![]() ![]() ![]() ![]() ![]() |
|
![]() |
||
Question everything.
|
||
![]() |
||
redratbike ![]() Moderator Group ![]() ![]() The Collector Messiah Joined: 07 May 2008 Status: Offline Points: 15032 |
![]() ![]() ![]() ![]() ![]() |
|
Some pretty bonkers bikes were built then
|
||
![]() www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
||
![]() |
||
Jollygiant ![]() Premium Member ![]() ![]() Carbon Whore Joined: 06 Aug 2012 Location: Naughty Step Status: Offline Points: 1253 |
![]() ![]() ![]() ![]() ![]() |
|
|
||
Check out my pre-preg carbon fibre
www.jollyscarbon.co.uk www.facebook.com/jollyscarbon www.instagram.com/jollyscarbon Has done The Ring…..Slowly but I did it!! |
||
![]() |
||
redratbike ![]() Moderator Group ![]() ![]() The Collector Messiah Joined: 07 May 2008 Status: Offline Points: 15032 |
![]() ![]() ![]() ![]() ![]() |
|
|
||
![]() www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
||
![]() |
||
Stevex ![]() Premium Member ![]() ![]() Joined: 05 Jul 2016 Location: UK Status: Offline Points: 827 |
![]() ![]() ![]() ![]() ![]() |
|
Ah, the good old days, I remember seeing Burns and his bikes at Santa Pod, when Superbike magazine used to run ¼ mile races...it was all the rage for a while. Remember doing an 11.06 on a Kwak GPz1100, so close to getting into the 10s.
|
||
People say I don't know Jack Sh1t; but I do, he lives next door.
|
||
![]() |
Post Reply ![]() |
|
Tweet |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |