FAQ Register Login |
Aprilia swinging arm welding/modification |
Post Reply |
Author | |
farmfab01
Moto3 racer Joined: 19 Nov 2012 Status: Offline Points: 12 |
Post Options
Thanks(0)
Posted: 19 Dec 2012 at 11:55 |
Hello is there any one who may be able to advise me on my Triumph 955 race bike project.
This is the swinging arm from my Triumph I have removed & am going to replace it with a 2006 RSV swinging arm, my plan is to cut out the linkage mount from the Aprilia arm then get a billet of alloy made to match the triumph linkage mounting point and weld that into the area that has been cut out. Does any one know what the spec of the Alloy casting/sheet the Aprilia swinging arm is What filler rod do you advise? What Billet do you advise? The large black dot is a rough position of the linkage pivot position
|
|
Spoonz
Admins Group Joined: 11 Feb 2008 Location: North Devon Status: Offline Points: 10726 |
Post Options
Thanks(0)
|
most of the ally stuff used to be made by Verlicchi in Italy so i guess the swinger is too, you could ask them.
Not sure even Aprilia would know as everything is outsourced. |
|
farmfab01
Moto3 racer Joined: 19 Nov 2012 Status: Offline Points: 12 |
Post Options
Thanks(0)
|
Sorry posted this in the wrong section
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |