FAQ Register Login |
PFM thumb brake |
Post Reply |
Author | |
dog78
Premium Member Joined: 18 Jan 2015 Location: Winchester UK Status: Offline Points: 1508 |
Post Options
Thanks(0)
Posted: 09 Nov 2020 at 21:03 |
PFM thumb brake for sale, clipon mounted type. In very good condition. Needs resivoir pipe and resivoir.
It does come with original PFM resivoir cap. £280 posted, they are £510 new. If interested send a pm and I can send some pictures. Thanks Rich 👍
|
|
cheesy
Premium Member top chef! Joined: 11 Feb 2008 Location: Peterborough Status: Offline Points: 1746 |
Post Options
Thanks(0)
|
Sounds a trick piece of kit
|
|
04 Tuono Fighter
1060 gen2 motor & some.... |
|
dog78
Premium Member Joined: 18 Jan 2015 Location: Winchester UK Status: Offline Points: 1508 |
Post Options
Thanks(0)
|
Hi cheesy, I hope you are keeping well mate.
Yes it is a beautiful piece of engineering art but won't clear my switch gear. So I have bought a Hel fork mounted one. Just got the R1 sorted and need surgery on my spine, you couldn't make it up 😂😭. After the hottest day on earth when I saw you at Donny, after a lot of work I got the throttle, mapping, slipper clutch and the TC sorted. I nearly bought a smalmoto for the Aprilia, it was brand new and about a grand in the US, but as I am not doing the big bore atm it seamed a waste, but I would have liked it all the same. Also it is hard enough preping one bike let alone two, the Aprilia is next, it hasn't been run for 3 years. I can't wait to hear it run next year 😁
|
|
cheesy
Premium Member top chef! Joined: 11 Feb 2008 Location: Peterborough Status: Offline Points: 1746 |
Post Options
Thanks(0)
|
Not bad matey, back on furlough after shutting the restaurant again.
Hope you're well Certainly trick, must resist The R1 is exceptional. Jeez, you couldn't write that. Hope it goes well. Donny was roasting. Smaltmoto systems are stunning, theyve just ceased trading again. I imported an evo 6 akrapovic to swap over with the arrow system. Ive still got a couple littke bits to swap on the bigbore tuono ive been putting off for a while, all attention has been on the gen2 tuono project. I haven't ridden mine for donkeys, but now the foots sorted as soon as k can be out ill be there
|
|
04 Tuono Fighter
1060 gen2 motor & some.... |
|
dog78
Premium Member Joined: 18 Jan 2015 Location: Winchester UK Status: Offline Points: 1508 |
Post Options
Thanks(0)
|
I am glad you are OK, it is a very tough time for everyone. Like you cheesy I haven't ridden since October 2019, and I am booked to go to Spain on 1st April but that all depends on my surgery and Covid. The EVO 6 is beautiful system, I remember Adams and it was like two drain pipes, amazing.
I was so tempted by the smalmoto, but I just can't upgrade both bikes all the time. I have a PFM race and rear caliper for the Aprilia and a Corsa Corta clutch master. She is quite a quick gen 2 anyway the big bores couldnt pass it down the straight at Donny in 2018 even the 1103, but the handling is so good with the Maxton shock plus the brakes and the 200 tyre, the she is still quite a special gen2 factory. Take care cheesy, I am hoping to do a meet or a ride out next year for a few of us, I hope you can make it, I will post it on here and hopefully a few of us can meet up, 👍
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |